Viewing a thread

You are logged in as a guest. ( logon | register )

CAD Drawings of the K series, k16 1.8 engine and head Moderators:
Technical Area-> Technical	Message format

Pitcrew

Posted 20/2/2006 6:05 AM (#111450)
Subject: CAD Drawings of the K series, k16 1.8 engine and head

New user

Posts: 1

Hi i have a request,

I am on the search for AutoCAD or any other CAD drawings of this engine, and mainly the head.

I need to find a CAD drawing of the Intake port as i am planning a project on swirl control to improve low RPM torque and fuiel economy

I would very much appreciate any infomation recived,
and if im looking in the wrong place i would like to be pointed in the correct direction if possible.

Pitcrew

Beep

Posted 20/2/2006 2:49 PM (#111649 - in reply to #111450)
Subject: RE: CAD Drawings of the K series, k16 1.8 engine and head

If you don't get any reply here then maybe try rovertech.net.

Leave this up though as someone may have something hidden away. There are a few people who don't visit every day who might have an idea.

M16GTA

Posted 20/2/2006 5:04 PM (#111693 - in reply to #111450)
Subject: RE: CAD Drawings of the K series, k16 1.8 engine and head

Location: Northants

My other halfs a CAD expert and if drawings and dimensions are provided could probably knock this up depending on time?!

goddardmetro

Posted 20/2/2006 5:17 PM (#111697 - in reply to #111450)
Subject: RE: CAD Drawings of the K series, k16 1.8 engine and head

Always Right ......Yeah Right!!

Posts: 678
500

Location: hertfordshire

Simpact did the entire engine on my race car. They are the guys for 3D digitization. If you can't find an existing model I'd try contacting them. All they need is a cylinder head and they uses lazers and clever things to measure it real time.

http://www.simpact.co.uk/index.html

Printer friendly version
E-mail a link to this thread
Jump to forum :

(Delete all cookies set by this site)
Running MegaBBS ASP Forum Software v2.0 © 2003 PD9 Software