Metropower Portal | ||
| ||
Spi 1.1 wiring Moderators: Jump to page : 1 Now viewing page 1 [25 messages per page] | |
General Discussions-> Forum closed - use www.metropower.info | Message format |
Ssr1 |
| ||
New user Posts: 4 | Hi all you Metrosexual's I am struggling to wire up my 1800 non VVC mgf loom to my 1.1 spi rover 100 I have the 5as and blips and ecu from original fitted. I have loads of wires from the EHC 1 and 2 ?. Any of you loom wizards fancy a trip to Oxford to help me out ? Cheers Simon | ||
Duckers |
| ||
Mad 1.8 Cabby Driver! Posts: 875 Location: Skegness | All you need is a Rover 100 mpi engine loom, and keep the original cooling fan set up, job done........... | ||
Ssr1 |
| ||
New user Posts: 4 | Can I wire the mgf loom into the 1.1 EHC black Or do I need to do loads of other work! | ||
AdrianSi |
| ||
Expert Posts: 8490 Location: Midlands | Ssr1 - 6/6/2012 10:04 PM Can I wire the mgf loom into the 1.1 EHC black Or do I need to do loads of other work! You can do but thats a conversion where as the R100 MPi loom is a direct plug and play fitment. | ||
Duckers |
| ||
Mad 1.8 Cabby Driver! Posts: 875 Location: Skegness | You do not need to use the MGF loom whatsoever............the easiest and most painless way is as I have said as the plugs fit the same on a 1.1 mpi R100 engine to the 1.8 MGF one you have. It's plug and play essentially! Duckers | ||
AdrianSi |
| ||
Expert Posts: 8490 Location: Midlands | I think finding Metros/100's being broken it starting to become a problem. I know id need to travel probably 15miles these days to even come across good old fashioned scrapyard! | ||
Ssr1 |
| ||
New user Posts: 4 | Would like to convert what I have ! can you tell me what to do etc ? I am happy to pay | ||
Duckers |
| ||
Mad 1.8 Cabby Driver! Posts: 875 Location: Skegness | You will be out of pocket at least £20-30 depending on on who would convert it for you. R100 mpi engine looms are 10 a penny on here.... Duckers | ||
Ssr1 |
| ||
New user Posts: 4 | Just need a PM on what to cut and shut and a PayPal address please desperate! | ||
AdrianSi |
| ||
Expert Posts: 8490 Location: Midlands | pm'd | ||
gazz0788 |
| ||
New user Posts: 15 Location: Spondon Derby DE217SX | hello sorry to bring this old thread back to life i have 1.1 spi and converting to vvc engine, i also have the 5as, key fob/vvc ecu and wiring for it. are you saying that the mpi loom is different please pm me or let me know asap.thanks | ||
Jump to page : 1 Now viewing page 1 [25 messages per page] |
Printer friendly version E-mail a link to this thread Jump to forum : |
(Delete all cookies set by this site) | |
Running MegaBBS ASP Forum Software v2.0 © 2003 PD9 Software | |