Elite Veteran
Posts: 925
Location: Thinking of vvc'ing my Roadster Brabus :-) | glyn-ellis - 24/4/2016 11:38 PM
Undid every nut and bolt related to the front suspension, pry barred the wheel over and re did them to see if I had bolted the wishbone and ball joints on wrong (I knew I hadn't) and it has made no difference. Are wishbones and top arms handed? I'm near 100% certain I have done it right! It'd hurting my brain now lol
You need to chop the springs, dont forget the ratio is @ 2:1, so an inch off the springs will lower the car 2".
Iirc, when I was initially playing around with mine when I first fitted the rear TF springs, I had to cable-tie
the tops of the springs to the frame towers to stop them dropping out on full droop and when jacking the wheels
up, as the chopped springs were shorter than the shocks.
|