Viewing a thread

You are logged in as a guest. ( logon | register )

inner rear sills, three door Moderators:
Technical Area-> Technical	Message format

snowy

Posted 16/10/2015 5:59 PM (#719921)
Subject: inner rear sills, three door

Regular

Posts: 137
100

Got to repair the inner and outter rear sill on a rover 100. Does anyone have any pictures of what the inner should look like?

I'm talking about the bit that forms the inner arch/inner rear sill.

Thanks

snowy

Posted 16/10/2015 6:27 PM (#719922 - in reply to #719921)
Subject: RE: inner rear sills, three door

Regular

Posts: 137
100

Mine looks like this...

Some idea of what should have been behind the sill would help.

Thanks

trebus

Posted 16/10/2015 9:04 PM (#719925 - in reply to #719921)
Subject: RE: inner rear sills, three door

Regular

Posts: 139
100

Above the upper swage the sill it is double skinned but below is single skin the subframe mount is welded to the outer sill, it is a straight plate from the mount out to the outer sill if you get a sill repair panel you will see what I mean(I think) is the other side the same ?

snowy

Posted 16/10/2015 10:19 PM (#719926 - in reply to #719925)
Subject: RE: inner rear sills, three door

Regular

Posts: 137
100

trebus - 16/10/2015 9:04 PM

Above the upper swage the sill it is double skinned but below is single skin the subframe mount is welded to the outer sill, it is a straight plate from the mount out to the outer sill if you get a sill repair panel you will see what I mean(I think) is the other side the same ?

Thanks. the other side is similar so I didn't really have a reference.

Printer friendly version
E-mail a link to this thread
Jump to forum :

(Delete all cookies set by this site)
Running MegaBBS ASP Forum Software v2.0 © 2003 PD9 Software