Viewing a thread

You are logged in as a guest. ( logon | register )

Mems 3 alternator. Moderators: Jump to page : 1 Now viewing page 1 [25 messages per page]
Technical Area-> Technical	Message format

matty h

Posted 23/4/2016 7:40 AM (#721906)
Subject: Mems 3 alternator.

Regular

Posts: 206
100

Please can someone give me some info regarding the mems 3 alternator wires as my alternator light is not coming on.
Matty

Dave 20VTRO

Posted 25/4/2016 7:49 PM (#721922 - in reply to #721906)
Subject: RE: Mems 3 alternator.

Elite Veteran

Posts: 925
500

Location: Thinking of vvc'ing my Roadster Brabus :-)

matty h - 24/4/2016 6:40 AM

Please can someone give me some info regarding the mems 3 alternator wires as my alternator light is not coming on.
Matty

You only need to use the one small wire for the warning light, (same colour as normal brown/yellow), the other one is for idle
changes with PAS like on the KV6 engine with the PAS pressure sensor.
The other thick cable is as normal, linked to the starter pos or direct to the battery pos.
if your light isn't coming on, check volts when running, ballpark figure is 13.8v to 14.2v is good.
If it is charging, check bulb and/or bulb holder connector contacts in the back of the dash.

Jump to page : 1
Now viewing page 1 [25 messages per page]

Printer friendly version
E-mail a link to this thread
Jump to forum :

(Delete all cookies set by this site)
Running MegaBBS ASP Forum Software v2.0 © 2003 PD9 Software