Viewing a thread

You are logged in as a guest. ( logon | register )

185/60 r13s Moderators: Jump to page : 1 Now viewing page 1 [25 messages per page]
Technical Area-> Technical	Message format

Tillythekid

Posted 10/9/2016 12:46 PM (#722697)
Subject: 185/60 r13s

Member

Posts: 30

Location: Kingsbridge, Devon

I've got a set of 185/60 r13s that fit perfectly on the front but hit the subframe on the back.
I thought about pumping up the hydrogas or possible using spacers.
Has anyone else had this before and what did they do?
Thanks

pickford

Posted 10/9/2016 4:48 PM (#722699 - in reply to #722697)
Subject: RE: 185/60 r13s

Extreme Veteran

Posts: 586
500

Location: brighouse just shy huddersfield

As far as I'm aware people tend to either run 3mm spacers or grind the radius arms a bit

Jackbooth

Posted 11/9/2016 1:36 PM (#722704 - in reply to #722697)
Subject: RE: 185/60 r13s

Regular

Posts: 102
100

Location: Keighley

If your talking about it hitting were the radius arm is at front of wheel then yes just grind them abit thats all ive done and many others have too

Tillythekid

Posted 23/9/2016 8:56 AM (#722734 - in reply to #722697)
Subject: RE: 185/60 r13s

Member

Posts: 30

Location: Kingsbridge, Devon

It's not hitting the radius arm-it's the actual subframe. I was going to have a go at pumping up the suspension to see if that helps then I've got the 3mm spacers ready to go so I don't have to grind the radius arm

Jump to page : 1
Now viewing page 1 [25 messages per page]

Printer friendly version
E-mail a link to this thread
Jump to forum :

(Delete all cookies set by this site)
Running MegaBBS ASP Forum Software v2.0 © 2003 PD9 Software