Metropower Portal
Metropower Portal
Search | Statistics | User listing Forums | Calendars |
You are logged in as a guest. ( logon | register )


Timing belt fitting.
Moderators:

   Technical Area-> TechnicalMessage format
 
 
Kraj
Posted 11/2/2006 12:42 PM (#109105)
Subject: Timing belt fitting.
New user

Posts: 2

Have just been fitting a new timing belt. I cant recall which way the top pullys arrow is to point. Is it up or down?

It's a 1.1 Advantage J reg (1992)

Thanks, Karl
 
R119GTA
Posted 11/2/2006 12:45 PM (#109106 - in reply to #109105)
Subject: RE: Timing belt fitting.


Metro Mad

Posts: 7653
500020005001002525
Location: Tamworth, Staffs		It will have a mark on in(line) with also Exhuast above it, this should be level with the engine and point towards the exhuast manifold, once your crank pully has been setup on the safe possition mark, the groove on the crank pully should point up vertically with the engine and line up with the single mark(line) on the plastic cover.
 
Kraj
Posted 12/2/2006 4:47 AM (#109171 - in reply to #109105)
Subject: RE: Timing belt fitting.
New user

Posts: 2

The top at bottom have come out of timing. Should there be a line on the plastic cover on the top pully as i cant see one.

Thanks
Printer friendly version
E-mail a link to this thread
Jump to forum :


(Delete all cookies set by this site)
Running MegaBBS ASP Forum Software v2.0
© 2003 PD9 Software