Metropower Portal
Metropower Portal
Search | Statistics | User listing Forums | Calendars |
You are logged in as a guest. ( logon | register )


timing
Moderators:

Jump to page : 1
Now viewing page 1 [25 messages per page]
   Technical Area-> TechnicalMessage format
 
wibblyp
Posted 22/2/2017 4:05 PM (#723309)
Subject: timing
Regular

Posts: 298
100100252525
Location: west country		Recently did head gasket and cam seals. Everything fine except cam seals still leaking. After a few months took a drive for about 60 miles. On arrival engine sounded like a tractor, as though a lifter had gone or the timing was out. What are the possible causes as it's now stranded in WestonSMare. 1.8 solid cam.

Thanks for any advice
Paul
DotMatrix
Posted 22/2/2017 10:33 PM (#723311 - in reply to #723309)
Subject: RE: timing


Expert

Posts: 4458
200020001001001001002525
Location: Jelling, Denmark
wibblyp - 22/2/2017 5:05 PM

Recently did head gasket and cam seals. Everything fine except cam seals still leaking. After a few months took a drive for about 60 miles. On arrival engine sounded like a tractor, as though a lifter had gone or the timing was out. What are the possible causes as it's now stranded in WestonSMare. 1.8 solid cam.

Thanks for any advice
Paul


is the belt tight enough and the tensioner fitted correctly and working?
leaky exhaust or manifold gasket?
Jump to page : 1
Now viewing page 1 [25 messages per page]
Printer friendly version
E-mail a link to this thread
Jump to forum :


(Delete all cookies set by this site)
Running MegaBBS ASP Forum Software v2.0
© 2003 PD9 Software