Metropower Portal | ||
| ||
fitting mgf dash Moderators: Jump to page : 1 Now viewing page 1 [25 messages per page] | |
Technical Area-> Styling | Message format |
chris_evz |
| ||
aka chris_evz Posts: 2726 Location: brynna south wales | i might be able to have a dash and dails from a mgf how much work is involved and if some one has done this any pics please | ||
R119GTA |
| ||
Metro Mad Posts: 7653 Location: Tamworth, Staffs | Just the dash clocks(speedo) or the complete dash board? The clocks can be made to fit and work but not correctly due to the fuel gauge setup. The dash board does fit in as I put one in mine as a trial but nothing lines up, you have to do a lot of cutting on the sides, bottom and top to get it in, and once you have done that there isn't much left. The once it is in you have to make everything else fit like vents, heater controls, console etc etc. You are better off making a new dash board up from scratch as it is a lot less work. | ||
quick_spider |
| ||
Expert Posts: 4262 Location: Tebworth | There a bit of kit on the market for about £30 to correct fuel gauge. | ||
111Sli |
| ||
Transport Guru MP Moderator Posts: 4947 Location: Bromley, Kent | Someone hacked up a 25/ ZR dash once and had it in a Metro. EDIT. Here is the post containing the photo; JamieS - 19/1/2008 6:58 PM Hes also used the clocks from the new mg tfs by the looks of it.. thats sweet In this thread; http://metropower.org.uk/forum/forums/thread-view.asp?tid=38370&posts=20#M373085 | ||
itsonlyme |
| ||
Master Parts Seller Posts: 2380 Location: Andover Hampshire | I will probaly be breaking a MGF next weekend, if you want the dash its yours to remove | ||
chris_evz |
| ||
aka chris_evz Posts: 2726 Location: brynna south wales | I will not do the dash but i will do the dails instead what is involved in fitting that and any pics again much apreciated as i got tge dash and dails but can sell the dash so keep the dails | ||
chris_evz |
| ||
aka chris_evz Posts: 2726 Location: brynna south wales | What is involved in just fitting the dails please | ||
MegganKelley |
| ||
The clocks can be made to fit and work but not correctly due to the fuel gauge setup. | |||
chris_evz |
| ||
aka chris_evz Posts: 2726 Location: brynna south wales | how would i get the fuel guage to work on this then as i am hopefully having a set and will the rest work ok | ||
118vvc cabs |
| ||
Regular Posts: 164 Location: solihull w.mids | it was my mate that fitted that dash. he then sold it to a lad with a heavily modified 5 door metro for good money. | ||
111Sli |
| ||
Transport Guru MP Moderator Posts: 4947 Location: Bromley, Kent | Is there any more photos/ could you get some if it still exists? | ||
118vvc cabs |
| ||
Regular Posts: 164 Location: solihull w.mids | most likly not as times change, phones change etc. it looked pretty good when it was in. fitted pretty well | ||
chris_evz |
| ||
aka chris_evz Posts: 2726 Location: brynna south wales | looks nice how much cutting as i am picking mine up next weekend hopefully | ||
ding |
| ||
chris_evz - 22/11/2012 4:57 PM looks nice how much cutting as i am picking mine up next weekend hopefully How the fook are you gonna fit alloys a hub and a mgf dash in that cronk of shit of yours? You'll have to drive with the roof down bopping your head to jls again | |||
chris_evz |
| ||
aka chris_evz Posts: 2726 Location: brynna south wales | jlfooking s haha wer taking ure car lol | ||
ding |
| ||
Taking mine car? Didnt know i was going! | |||
redgrave66 |
| ||
purple_metty Posts: 2165 Location: leicsestershire | I think he ment he was towing your car with his to fill with goodies, that jls thing made me laugh | ||
chris_evz |
| ||
aka chris_evz Posts: 2726 Location: brynna south wales | if you wanted to that was mate i am buying dinner lol | ||
chris_evz |
| ||
aka chris_evz Posts: 2726 Location: brynna south wales | and i should be able to fit it in my car lol i will just have the roof down to fit it in then put it back up lol | ||
118vvc cabs |
| ||
Regular Posts: 164 Location: solihull w.mids | I remember he had to lose the front window vents for the heaters, and the pass side air vent was cut out aswel to fit correctly on the width so the steering wheel would line up with the gap. | ||
chris_evz |
| ||
aka chris_evz Posts: 2726 Location: brynna south wales | i have decided just having the dails now and make a dash | ||
Jump to page : 1 Now viewing page 1 [25 messages per page] |
Printer friendly version E-mail a link to this thread Jump to forum : |
(Delete all cookies set by this site) | |
Running MegaBBS ASP Forum Software v2.0 © 2003 PD9 Software | |