Viewing a thread

You are logged in as a guest. ( logon | register )

central locking indicator flash Moderators:
Technical Area-> Technical	Message format

rovertaken37

Posted 4/1/2016 6:30 PM (#720768)
Subject: central locking indicator flash

Member

Posts: 47

Location: Burton upon Trent

I've been reading through some of the threads and can't seem to make head or tails or it :/

I have a 1998 114 and I recently changed the engine to a 1.8 from an Mgf and we changed the alarm box to 5as I assume.. the one with Two sockets from the Mgf. (Two button fobs)

From what I can work out it's easier to add flashing indicators to a 5as with the TWO connectors!?
Firstly will there be another plug knocking around behind the dash to add the flashing capabilities once plugged in.
Or do I need to manually wire somthing up to add this
function same for interior light on unlocking! ?

Thanks

rovertaken37

Posted 15/1/2016 11:09 PM (#720857 - in reply to #720768)
Subject: RE: central locking indicator flash

Member

Posts: 47

Location: Burton upon Trent

so I've taken the Glove box out today and noticed this blue connector!? Wondering if it's Related to my Above question ?

I also snapped a Picture of the lucas box >>>

111Sli

Posted 16/1/2016 3:02 PM (#720860 - in reply to #720768)
Subject: RE: central locking indicator flash

Transport Guru
MP Moderator

Posts: 4947
2000

Location: Bromley, Kent

Hello mate,

There's a lot of discussion about it but best regarding I found here;

http://forums.mg-rover.org/metro-rover-100-110/5as-twinplug-flashing-indicators-403945/

Metromartin

Posted 28/1/2016 12:33 PM (#720987 - in reply to #720768)
Subject: RE: central locking indicator flash

MP Admin

Posts: 17870
5000

Location: Gloucester

yes thats the right blue header for the indicator flash,

you will need a 5as box with two plugs.

two wires from the white 5as plug to the green wires on the blue header. I forget which two wires it is on the 5as box though. I cut a wiring connector of a scrap car which showed where they go.

Just dont mix up the sides when you wire it up otherwise both sides will flash when you indicate!!

Printer friendly version
E-mail a link to this thread
Jump to forum :

(Delete all cookies set by this site)
Running MegaBBS ASP Forum Software v2.0 © 2003 PD9 Software