Metropower Portal
Metropower Portal
Search | Statistics | User listing Forums | Calendars |
You are logged in as a guest. ( logon | register )


Fitting MGF Wheels to Rover 100
Moderators:

   Technical Area-> TechnicalMessage format
 
 
MetroChris
Posted 22/10/2015 1:05 PM (#720023)
Subject: Fitting MGF Wheels to Rover 100


Member

Posts: 42
25
Location: Newcastle Upon Tyne		I know this has probably been asked hundreds of times but and I've seen it done but no further advice after or before fitting

I was thinking about getting a second set of alloy wheels the 15" MGF. According to information the 95.25PCD is correct but is there any other modifications needed. I sure I read a thread but can't find it now about having to use MGF ball joints to stop the standard 100's popping out.

Any further advice I would sincerely appreciate
 
joshmk4
Posted 22/10/2015 1:31 PM (#720025 - in reply to #720023)
Subject: RE: Fitting MGF Wheels to Rover 100


Regular

Posts: 145
10025
Location: Lincolnshire		First thing I can think is different offset, will most likely rub back and front even at standard height. Have seen people say it ruins the ride a bit too
 
MetroChris
Posted 22/10/2015 1:34 PM (#720026 - in reply to #720023)
Subject: RE: Fitting MGF Wheels to Rover 100


Member

Posts: 42
25
Location: Newcastle Upon Tyne		Perfect thank you, I'll stick with what I'm getting
Printer friendly version
E-mail a link to this thread
Jump to forum :


(Delete all cookies set by this site)
Running MegaBBS ASP Forum Software v2.0
© 2003 PD9 Software