Viewing a thread

You are logged in as a guest. ( logon | register )

fly wheel Moderators: Jump to page : 1 Now viewing page 1 [25 messages per page]
Technical Area-> Technical	Message format

dusty100

Posted 22/3/2016 9:25 PM (#721564)
Subject: fly wheel

New user

Posts: 3

hi guys have a rover 100 1.1 mpi am doing a engine swap with a 1.8 mgf mems 2 dizzy engine what flywheel/clutch will i need can i use the 1.8 flywheel?
thanks

1380racer

Posted 22/3/2016 10:06 PM (#721566 - in reply to #721564)
Subject: RE: fly wheel

Regular

Posts: 196
100

Location: Beds

You need the 1.1 flywheel. The 1.8 one is too big for the R65 gearbox bellhousing.

trebus

Posted 23/3/2016 6:02 PM (#721569 - in reply to #721564)
Subject: RE: fly wheel

Regular

Posts: 139
100

1.6 is the better flywheel to use

Dave 20VTRO

Posted 25/3/2016 11:27 PM (#721596 - in reply to #721566)
Subject: RE: fly wheel

Elite Veteran

Posts: 925
500

Location: Thinking of vvc'ing my Roadster Brabus :-)

1380racer - 23/3/2016 9:06 PM

You need the 1.1 flywheel. The 1.8 one is too big for the R65 gearbox bellhousing.

1.1 flywheel is no good, as it will only accept a 180mm dia clutch plate, best one is as Trebus says, a 1400
or 1600 flywheel will take a 200mm clutch kit.

Jump to page : 1
Now viewing page 1 [25 messages per page]

Printer friendly version
E-mail a link to this thread
Jump to forum :

(Delete all cookies set by this site)
Running MegaBBS ASP Forum Software v2.0 © 2003 PD9 Software