Viewing a thread

You are logged in as a guest. ( logon | register )

central locking bracket Moderators:
Technical Area-> Technical	Message format

badidio

Posted 22/2/2006 6:58 PM (#112273)
Subject: central locking bracket

Regular

Posts: 207
100

hey

i've bought a central locking kit and had a look at fitting it in my r100, got a question and wud be grateful if anyone cud help, i've got the thin steel brackets but cud anyone tell me exactly what i need to do with them to fit the motors into the front doors.

cheers

togusa

Posted 22/2/2006 7:30 PM (#112281 - in reply to #112273)
Subject: RE: central locking bracket

Expert

Posts: 1930
1000

Location: southend

there should be two holes in the door already...if you look on the edge of the door there are two rubber gromits thats where the motor should fit in you shouldnt need the metal brackets...it connects to a sea saw type pece of plastic on the lock above it....using a metal rod from the solonode to the plastic bit the other way of doing it is fixing it somwhere in the door and running a rod to the pop! lock and bracket it to that...but wouldnt advise it u could naker the solonode if u keep forcing it up and down without power

Printer friendly version
E-mail a link to this thread
Jump to forum :

(Delete all cookies set by this site)
Running MegaBBS ASP Forum Software v2.0 © 2003 PD9 Software