|
 aprilia kitten, rsv mille powered reliant kittenModerators: Jump to page : 1 2 Now viewing page 1 [25 messages per page] | |
| Gallery-> Non Metro gallery | Message format |
dazz 111 |
| ||
 Extreme Veteran Posts: 592   Location: kent | hi, been working on this over Christmas, its a reliant kitten (4 wheeled version of the 3 wheeler) plan is to build a drift car (might not work out like that though but ah well) engine that is going in is a aprilia rsv mille 1000 it'll be running reliant rear axle with welded diff and a custom prop                         that's all so far, having trouble with the prop adapter so couldn't get that done over Christmas break should have it started tomorrow  sorry for the bad pictures this note 4 isn't as good as my old phone!! | ||
| petrol_head |
| ||
 drive it like its hired    | |||
| dazz 111 |
| ||
Extreme Veteran Posts: 592 Location: kent | |||
| petrol_head |
| ||
drive it like its hired | |||
| dazz 111 |
| ||
Extreme Veteran Posts: 592 Location: kent | |||
| pickford |
| ||
 Extreme Veteran Posts: 586 Location: brighouse just shy huddersfield | Awesome always wanted to build something like this should be a little monster | ||
| djwilma |
| ||
 Expert Posts: 2812 Location: Bournemouth | |||
| dazz 111 |
| ||
Extreme Veteran Posts: 592 Location: kent | 10.5k, it's only 125bhp and something like 70 torque but the cars 500kg Only opted for this engine because of the sound they make, nice v2 sound | ||
| munday |
| ||
 Expert Posts: 5629 Location: Letchworth/Basildon | |||
| Morey |
| ||
 Events Organiser MP Admin Posts: 1923  Location: Somerset | |||
| dazz 111 |
| ||
Extreme Veteran Posts: 592 Location: kent | got the engine started tonight sounds the dogs danglys!!!! video of the start up - using carb cleaner as fuel as didn't have any petrol at the unit https://www.youtube.com/watch?v=4kHkW4nl-Io | ||
| Ians r100 gta vvc |
| ||
 Veteran Posts: 376 | |||
| dazz 111 |
| ||
Extreme Veteran Posts: 592 Location: kent | |||
| dazz 111 |
| ||
Extreme Veteran Posts: 592 Location: kent | not a lot more done, half made a propshaft adapter, made from 10mm steel and chopped the prop up ready for welding, heatwraped the exhaust and made the clutch from a motorbike master cylinder          | ||
| dazz 111 |
| ||
Extreme Veteran Posts: 592 Location: kent | more done to the kitten, prop is now done! at last, the adapter I made was wonky so I had my mate build one...what was also wonky so we just welded the thing together bodys back on, wiring is kinda done, just needs the body loom connecting to the bike loom...but I drove it!!!! out the unit and back in and loved it! clutch feels nice and springy so should get some nice 1/4 starts only problem was the gearlever wasn't man enough so a little bit of 5mm plate sorted that tomorrow ill attempt to plumb the brakes up and finish the wiring then go find a roundabout       | ||
| FreddieS |
| ||
 Elf eating dog breeder Posts: 10531 Location: Guildford | |||
| dazz 111 |
| ||
Extreme Veteran Posts: 592 Location: kent | today I tided the loose wires up and finished plumbing in the brakes, also welded a cage around the prop tunnel just incase the prop decides to fall off managed to get a quick drive in it, only was able to take it upto 3rd but felt pretty mental =P   | ||
| dazz 111 |
| ||
Extreme Veteran Posts: 592 Location: kent | made a adapter for the air box today, also the clutch slave cylinder has a crack in it and the gearlinkage is naff so ordered parts to replace the both also had to fit a bigger rad as the reliant one was blocked so fitted the rad off my old kit car on, works a treat     | ||
| Dave 20VTRO |
| ||
| Elite Veteran Posts: 925 Location: Thinking of vvc'ing my Roadster Brabus :-) | |||
| dazz 111 |
| ||
Extreme Veteran Posts: 592 Location: kent | |||
| dazz 111 |
| ||
Extreme Veteran Posts: 592 Location: kent | well...what a nightmare this car is lol problem after problem new problem now is the sprag clutch has gone so it wont start!!! but the fun I've been having in it means I don't care! =D but got myself a rollcage and some joints for a anti-tramp bar for the axle ill give the cage a paint up before it goes in though   | ||
| djwilma |
| ||
Expert Posts: 2812 Location: Bournemouth | |||
| dazz 111 |
| ||
Extreme Veteran Posts: 592 Location: kent | |||
| djwilma |
| ||
Expert Posts: 2812 Location: Bournemouth | |||
| dazz 111 |
| ||
Extreme Veteran Posts: 592 Location: kent | |||
| Jump to page : 1 2 Now viewing page 1 [25 messages per page] |
| Printer friendly version E-mail a link to this thread Jump to forum : |
| (Delete all cookies set by this site) | |
| Running MegaBBS ASP Forum Software v2.0 © 2003 PD9 Software | |
