Viewing a thread

You are logged in as a guest. ( logon | register )

Suspension balljoint renewal (A-series) Moderators: Jump to page : 1 Now viewing page 1 [25 messages per page]
Technical Area-> Technical	Message format

ptmt

Posted 16/2/2016 1:08 PM (#721139)
Subject: Suspension balljoint renewal (A-series)

New user

Posts: 12

Location: Israel

Haynes tells to hold the driving flange and swivel hub stationary.
How to do it without damage to any part?

DotMatrix

Posted 17/2/2016 8:58 AM (#721142 - in reply to #721139)
Subject: RE: Suspension balljoint renewal (A-series)

Expert

Posts: 4458
2000

Location: Jelling, Denmark

I suppose this is front upper or lower ball-joins?
the last two times I changed one I removed the flange from the drive-shaft and hub and removed the hub from the car. put the hub in a vice and removed the ball-joint with a special extra long 46mm socket. then refit in reverse order. be aware that there are two kinds of ball-joins for the a-series.

ptmt

Posted 24/3/2016 3:17 PM (#721580 - in reply to #721139)
Subject: RE: Suspension balljoint renewal (A-series)

New user

Posts: 12

Location: Israel

Jump to page : 1
Now viewing page 1 [25 messages per page]

Printer friendly version
E-mail a link to this thread
Jump to forum :

(Delete all cookies set by this site)
Running MegaBBS ASP Forum Software v2.0 © 2003 PD9 Software