Viewing a thread

You are logged in as a guest. ( logon | register )

Push button starter Moderators:
Technical Area-> Technical	Message format

Bigtel1977

Posted 22/7/2015 7:38 PM (#719108)
Subject: Push button starter

Member

Posts: 75

Hi all, I'm looking to fit a push button starter with toggle switch to my GTi track car. has anyone got a decent wiring diagram I can follow or tell me the easiest way to do it please.

Thanks, Terry

Marv_666

Posted 23/7/2015 3:11 PM (#719118 - in reply to #719108)
Subject: RE: Push button starter

'88 MG METRO 1300

Posts: 1117
1000

Location: Dudley, Midlands

May well struggle to find a wiring diagram (well, wire colours at least)...
as it would basically be a "How To Hot-wire A Metro" guide!?!
Will you be leaving the ignition in place for key requirement and steering lock to prevent theft?
Will that be removed and a key switch in the panel with ignition switch and start button?
The easiest way is not to bother... hassle will be involved any way you do it...
so either forget the idea, or sketch it up exactly as you want it and go from there!?

Bigtel1977

Posted 24/7/2015 2:27 PM (#719133 - in reply to #719108)
Subject: RE: Push button starter

Member

Posts: 75

Steering lock is already removed..has to be for track regulations...I have a main kill switch, I want a toggle switch to arm the ignition, then a push button starter to fire it up.

A lot of other cars have them on track and looks cool, I may see if I can contact one of them for a diagram or advice.

t3gav

Posted 24/7/2015 3:38 PM (#719134 - in reply to #719108)
Subject: RE: Push button starter

Elite Veteran

Posts: 664
500

Location: Herts

https://www.minispares.com/product/Classic/Electrics/Switches,%20stalks/MSA336.aspx?0912&ReturnUrl=/search/classic/switch panel.aspx|Back to search

Printer friendly version
E-mail a link to this thread
Jump to forum :

(Delete all cookies set by this site)
Running MegaBBS ASP Forum Software v2.0 © 2003 PD9 Software