Metropower Portal | ||
| ||
Code for Radio Moderators: Jump to page : 1 Now viewing page 1 [25 messages per page] | |
Technical Area-> I.C.E. | Message format |
OrangeManDan |
| ||
Border Crosser Posts: 3232 Location: Carmarthenshire, Wales | I have no code for my original Rover Headunit how can i get one? | ||
nwarl |
| ||
Veteran Posts: 351 Location: BIRMINGHAM | My girl friends dad uses a website to get his radio codes I'll try find out what site as its handy But it worked on my Citroen n her dads BMW | ||
jack thornton |
| ||
Veteran Posts: 346 | http://www.instant-radio-code.co.uk/mg-rover-radio-codes.php Also on Ebay | ||
OrangeManDan |
| ||
Border Crosser Posts: 3232 Location: Carmarthenshire, Wales | Thanks both. | ||
nwarl |
| ||
Veteran Posts: 351 Location: BIRMINGHAM | im sure the one we used was free???? ill find out n report back 2mora guys | ||
OrangeManDan |
| ||
Border Crosser Posts: 3232 Location: Carmarthenshire, Wales | Thanks Nwarl. | ||
OrangeManDan |
| ||
Border Crosser Posts: 3232 Location: Carmarthenshire, Wales | Where would i find the 14 digit serial code? | ||
jack thornton |
| ||
Veteran Posts: 346 | The radio has to come out to read it. 2 old ones i have have it right side AR and left side Phillips - pressed into casing. | ||
OrangeManDan |
| ||
Border Crosser Posts: 3232 Location: Carmarthenshire, Wales | Cheers Jack. I got the code now. | ||
Dave 20VTRO |
| ||
Elite Veteran Posts: 925 Location: Thinking of vvc'ing my Roadster Brabus :-) | You can disable the code so you can disconnect the battery, cant see anybody wanting to nick a rover cassette radio nowadays, no market for them. iirc, to disable, you press up tune button whilst turning on, then the code dots appear, you then input the code as normal, on the last code input, the unit will beep, then its done, no code req. Done this to my trackday R100 as its on a master switch to the battery. | ||
OrangeManDan |
| ||
Border Crosser Posts: 3232 Location: Carmarthenshire, Wales | Cheers mate. No longer needed but good to know, cheers. | ||
Metromartin |
| ||
MP Admin Posts: 17870 Location: Gloucester | Dave rcr - 3/7/2012 5:11 PM You can disable the code so you can disconnect the battery, cant see anybody wanting to nick a rover cassette radio nowadays, no market for them. iirc, to disable, you press up tune button whilst turning on, then the code dots appear, you then input the code as normal, on the last code input, the unit will beep, then its done, no code req. Done this to my trackday R100 as its on a master switch to the battery. good advice, i've done this too, the -C- doesn't show if the code function has been deactivated. | ||
Jump to page : 1 Now viewing page 1 [25 messages per page] |
Printer friendly version E-mail a link to this thread Jump to forum : |
(Delete all cookies set by this site) | |
Running MegaBBS ASP Forum Software v2.0 © 2003 PD9 Software | |