Metropower Portal
Metropower Portal
Search | Statistics | User listing Forums | Calendars |
You are logged in as a guest. ( logon | register )


fuse box
Moderators:

   Technical Area-> TechnicalMessage format
 
 
dam_buster
Posted 25/2/2006 5:36 PM (#113266)
Subject: fuse box


Expert

Posts: 2199
2000100252525
Location: Maidstone		is the fuse box in the rover metro and r100 the same?

just out of interest,

 
tonyb
Posted 26/2/2006 1:44 PM (#113565 - in reply to #113266)
Subject: RE: fuse box


Electrical genius

Posts: 1310
1000100100100
Location: East Devon		Yes they are interchangeable

tony
 
dam_buster
Posted 26/2/2006 2:13 PM (#113572 - in reply to #113266)
Subject: RE: fuse box


Expert

Posts: 2199
2000100252525
Location: Maidstone		wiked thanks!

 
R119GTA
Posted 26/2/2006 2:14 PM (#113573 - in reply to #113266)
Subject: RE: fuse box


Metro Mad

Posts: 7653
500020005001002525
Location: Tamworth, Staffs		There are 2 types in the Rover Metro, different layout of internal wiring and relays, if you need a new one just make sure that you get exactly the same layout, otherwise you will have to do some wiring alterations to get everything working correctly.
 
Dave VVC
Posted 26/2/2006 3:05 PM (#113622 - in reply to #113266)
Subject: RE: fuse box
Expert

Posts: 2965
20005001001001001002525
The fuseboxes in the metro and r100 are NOT the same
they even have different part no.s on them on a purple
sticker.
 
tonyb
Posted 27/2/2006 6:58 AM (#113784 - in reply to #113622)
Subject: RE: fuse box


Electrical genius

Posts: 1310
1000100100100
Location: East Devon		Hi Dave

Get the DMM out and ring them out like I did.
They look different but are the same configuration.

tony
 
Metro_Si
Posted 27/2/2006 11:41 AM (#113878 - in reply to #113266)
Subject: RE: fuse box


Elite Veteran

Posts: 872
5001001001002525
Location: Wiltshire		I have put a R100 fuse box in my metro and haven't had any problems since.

Alex.
 
tonyb
Posted 27/2/2006 12:47 PM (#113946 - in reply to #113878)
Subject: RE: fuse box


Electrical genius

Posts: 1310
1000100100100
Location: East Devon		Thanks Alex for the back up!!

Hi Dave and Matt - those fuseboxs are interchangeable.

I have done a lot of research here.

I rang out a GSI vehicle harness in my lounge (on two old curtains) and then drew it in AutoCad.

I then rang out the R100 fuse box and drew that up.

Also checked fuse ratings etc and their individual ccts.

Then when I scraped the first GTI I checked that fusebox and more importantly the vehicle harness
against the info gained from the GSI and all fell into place.

Fusebox pic below. Fuzzy because of the 100k limit -- but I don't want to give
too much info away!!


tony







(FuseBoxGSi_Sch_01.jpg)



Attachments
----------------
Attachments FuseBoxGSi_Sch_01.jpg (86KB - 98 downloads)
Printer friendly version
E-mail a link to this thread
Jump to forum :


(Delete all cookies set by this site)
Running MegaBBS ASP Forum Software v2.0
© 2003 PD9 Software