Metropower Portal
Metropower Portal
Search | Statistics | User listing Forums | Calendars |
You are logged in as a guest. ( logon | register )


Indicator/Hazard Issue
Moderators:

   Technical Area-> TechnicalMessage format
 
 
skrib
Posted 17/8/2015 8:08 AM (#719359)
Subject: Indicator/Hazard Issue


Regular

Posts: 133
10025
Location: Teesside		I have an issue with my indicators. Neither work and when i turn the hazards on the flasher relay just buzzes.

Ive tried a different hazard switch and also a different relay.

The relay was from an spi and was different to the one in my mpi so im not ruling out a faulty relay.

Has anyone experienced this before?
 
skrib
Posted 17/8/2015 12:54 PM (#719368 - in reply to #719359)
Subject: RE: Indicator/Hazard Issue


Regular

Posts: 133
10025
Location: Teesside		Found a split wire, green/red, on the wiring harness by the steering column. It was in contact with metal so moved it away.

The hazard work now and the relay no longer buzzes but still no indicators. Ive checked fuses.

Ive also tried a different stalk which didnt help.

Edited by skrib 17/8/2015 12:56 PM
 
MetroGaz
Posted 17/8/2015 4:26 PM (#719370 - in reply to #719359)
Subject: RE: Indicator/Hazard Issue
Veteran

Posts: 335
10010010025
Location: York, tis Cold Up North!		Scrib

So you have ruled out the lamps (all 6 plus dashboard lamps) as they work when Hazard flashers are on yes?

As I see it you only have 2 fuses to check (Fuse 9 and Fuse 21) and the Fusebox relay and then the Hazard Switch itself and the Stalk unit.

If its not one of these it is obviously a wiring issue - loose connection, shorted wire - whatever.

If you are sure it is not teh fuses or relays?/switches etc you need a wiring diagram to start tracing where power is getting lost. If you need one PM me and I will send a PDF.

MG
 
skrib
Posted 17/8/2015 8:50 PM (#719375 - in reply to #719370)
Subject: RE: Indicator/Hazard Issue


Regular

Posts: 133
10025
Location: Teesside		Funnily enough Gary I found a thread you posted on a while back and followed your advice to check fuse 9.

I wasn't aware that fuse 9 was indicators and now its sorted.
 
Tobys
Posted 18/8/2015 12:44 AM (#719380 - in reply to #719359)
Subject: RE: Indicator/Hazard Issue


Regular

Posts: 179
100252525
Location: Sittingbourne, Kent		MG, could you post a link of the diagram please? I'm having a similar issue with my headlights. My sideights work, but not my headlights or full beam. The wiring off the stalk seem fine, also the relay. I've changed the fuses a couple of times, but again, they keep blowing

Just wanna get my headlights sorted once and for all.

Edited by Tobys 18/8/2015 12:45 AM
Printer friendly version
E-mail a link to this thread
Jump to forum :


(Delete all cookies set by this site)
Running MegaBBS ASP Forum Software v2.0
© 2003 PD9 Software