Viewing a thread

You are logged in as a guest. ( logon | register )

Flywheel and clutch Moderators: Jump to page : 1 Now viewing page 1 [25 messages per page]
Technical Area-> Technical	Message format

Midi

Posted 16/11/2016 11:30 PM (#722928)
Subject: Flywheel and clutch

New user

Posts: 14

Location: south birmingham

Has anyone got the part numbers for the correct clutch kit and flywheel I need for a 160vvv onto a r56u gearbox?
Read it's a rover 200 1.6. One I need. But couldn't find any part numbers?
MIDI

skrib

Posted 17/11/2016 8:16 AM (#722929 - in reply to #722928)
Subject: RE: Flywheel and clutch

Regular

Posts: 133
100

Location: Teesside

often people are led to believe that its 216/416 only but the same flywheel and clutch was fitted to 1.4 and 1.6 25's, 45's, zr's and zs's with an r65 up to 2003.

after 2003 an ib5 box was used. The flywheel looks identical and has the same part number stamped on it but its actually bigger and doesnt fit an r65 box.

Midi

Posted 17/11/2016 9:01 PM (#722933 - in reply to #722928)
Subject: RE: Flywheel and clutch

New user

Posts: 14

Location: south birmingham

So which clutch and flywheel would you recommend?

Dave VVC

Posted 19/11/2016 9:03 PM (#722943 - in reply to #722933)
Subject: RE: Flywheel and clutch

Expert

Posts: 2965
2000

Midi - 18/11/2016 8:01 PM

So which clutch and flywheel would you recommend?

R100 mpi 1.4 flywheel, not Metro as most use a different signal pattern (3AS single button alarm), you need 5AS 2 button alarm type Flywheel.
Clutch kit for 1.4 and 1.6 is 'URB 000050'

Jump to page : 1
Now viewing page 1 [25 messages per page]

Printer friendly version
E-mail a link to this thread
Jump to forum :

(Delete all cookies set by this site)
Running MegaBBS ASP Forum Software v2.0 © 2003 PD9 Software