fly wheel
 
dusty100
Posted 22/3/2016 9:25 PM (#721564)
Subject: fly wheel
New user

Posts: 3

hi guys have a rover 100 1.1 mpi am doing a engine swap with a 1.8 mgf mems 2 dizzy engine what flywheel/clutch will i need can i use the 1.8 flywheel?
thanks
 
1380racer
Posted 22/3/2016 10:06 PM (#721566 - in reply to #721564)
Subject: RE: fly wheel


Regular

Posts: 196
100252525
Location: Beds		You need the 1.1 flywheel. The 1.8 one is too big for the R65 gearbox bellhousing.
 
Dave 20VTRO
Posted 25/3/2016 11:27 PM (#721596 - in reply to #721566)
Subject: RE: fly wheel
Elite Veteran

Posts: 925
50010010010010025
Location: Thinking of vvc'ing my Roadster Brabus :-)
1380racer - 23/3/2016 9:06 PM

You need the 1.1 flywheel. The 1.8 one is too big for the R65 gearbox bellhousing.


1.1 flywheel is no good, as it will only accept a 180mm dia clutch plate, best one is as Trebus says, a 1400
or 1600 flywheel will take a 200mm clutch kit.
 
trebus
Posted 23/3/2016 6:02 PM (#721569 - in reply to #721564)
Subject: RE: fly wheel


Regular

Posts: 139
10025
1.6 is the better flywheel to use