160vvc vacuum hoses

matty h Posted 23/2/2016 9:11 PM (#721216) Subject: 160vvc vacuum hoses Regular Posts: 206 I am fitting a 160vvc mems3 engine and would like to know where the pipes go on the inlet manifold photo if possible. There is a connection on the fuel pressure regulator, two on the end of the inlet manifold next to the map sensor and one just after the throttle body can someone help me and tell me or show me what goes on all these. Thanks Matty

R100_vvc Posted 23/2/2016 9:54 PM (#721217 - in reply to #721216) Subject: RE: 160vvc vacuum hoses Expert Posts: 2029 Location: sittingbourne, kent the 2 left other then fitting one to the fuel regulator are normally blanked in a metro, unless you still want to use the carbon canister which will use one? otherwise blank off the remaining 2 Edited by R100_vvc 23/2/2016 9:56 PM