Damaged loom - wiring diagram?
 
Tracktro
Posted
24/7/2016 9:23 PM (#722436)
Subject:
Damaged loom - wiring diagram?
Veteran
Posts: 482
Location: Meuspath
Part of my VVC loom is damaged. Does anyone have a wiring diagram I could use?
I think the damage is to part of the loom that has an unused connector. I think this damage is preventing the engine from firing.
I'll try and post a picture of the connector
 
Tracktro
Posted
24/7/2016 9:27 PM (#722437 - in reply to #722436)
Subject:
RE: Damaged loom - wiring diagram?
Veteran
Posts: 482
Location: Meuspath
Won't let me upload from phone.
The damage is next to the blue connector on the loom. It has three wires, black, white with orange tracer and green with pink tracer.
 
stormgreygti
Posted
25/7/2016 10:46 AM (#722442 - in reply to #722436)
Subject:
RE: Damaged loom - wiring diagram?
Roversport replica
Posts: 1788
Location: Norfolk
I would assume the green/pink is 12v, white/ orange is the signal and black the ground.
Connor.
 
Tracktro
Posted
25/7/2016 5:44 PM (#722447 - in reply to #722436)
Subject:
RE: Damaged loom - wiring diagram?
Veteran
Posts: 482
Location: Meuspath
Any idea what they do? I'm yet to find a decent wiring diagram
 
quick_spider
Posted
25/7/2016 8:11 PM (#722448 - in reply to #722436)
Subject:
RE: Damaged loom - wiring diagram?
Expert
Posts: 4262
Location: Tebworth
Sounds like the gearbox speed sensor. Should run fine without anything connected to it.
 
Tracktro
Posted
25/7/2016 9:53 PM (#722450 - in reply to #722436)
Subject:
RE: Damaged loom - wiring diagram?
Veteran
Posts: 482
Location: Meuspath
The damaged part looks like this:
And the connector salvaged from the other end:
 
stormgreygti
Posted
26/7/2016 10:26 PM (#722460 - in reply to #722436)
Subject:
RE: Damaged loom - wiring diagram?
Roversport replica
Posts: 1788
Location: Norfolk
What vvc engine is the wiring loom from?
Is it a converted metro mpi loom?
I've looked at all the wiring diagrams I have and can't seem to find those colours.
Connor.
 
stormgreygti
Posted
26/7/2016 10:47 PM (#722461 - in reply to #722436)
Subject:
RE: Damaged loom - wiring diagram?
Roversport replica
Posts: 1788
Location: Norfolk
If that green/pink wire were brown/pink then it would be the gearbox speed transducer, because the other colours would Match
Connor.
 
Tracktro
Posted
27/7/2016 11:48 PM (#722469 - in reply to #722436)
Subject:
RE: Damaged loom - wiring diagram?
Veteran
Posts: 482
Location: Meuspath
The VVC engine and loom was from 200 Vi and fitted to a 1.1 body loom iirc.
Afaik this connector was unused and now its damaged the car doesn't run.
Does the white/orange have anything to do with the immobiliser?