Sean's Rover metro 1.8 turbo |
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | Hi all, this my new car :D it's in great condition for a 1995 r100 and ideal bases for my vvc engine. l have been busy all weekend swapping all my bits over from my old GTa, which sadly rust started to get the best of it. Hers's a few pics, Here's a few pics of my old GTa before going to scrap yard with all of its goodness removed Now the spec as it stands; lowered and individulised with GTi rear cans front and rear antiroll bars mgf calipers with vented discs (EBC drilled and groved and mintex pads) Raceline 14" alloys with 195 45 14 tyres 1.8 vvc (143) port n polished head with piper 270 exhaust cam and 52mm throttle body R65u GTa gearbox (close ratio) carbon enclosed filter directed to heater box/bonnet vent de-burred exhaust manifold/1800 downpipe cat-bypassed sportex exhaust with larger silencers GTi side skirts and boot spoiler laguna spliter (to be fitted) GTi interior black carpet 130 rev counter clocks mgf steering wheel/airbag Edited by R100_vvc 21/4/2015 8:54 AM | ||
vvc warrior |
| ||
Retired Admin Posts: 15557 Location: Co. Durham North East | a very clean R100, looks sweet as | ||
GTaddz |
| ||
Expert Posts: 2568 Location: Up in the lakes | Car looks mint! Dont see many 111si's. Keep ahead of the rot with this one and you'l see alot of happy years with it. Nice 7pec too. Should be a lil weapon. | ||
Metromartin |
| ||
MP Admin Posts: 17870 Location: Gloucester | nice and tidy car, perfect for a vvc! I think you should run it on LPG with that reg aswell! | ||
Alex G |
| ||
Elite Veteran Posts: 929 Location: Maidstone Kent SE UK | Nice one mate. Looking good | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | Thanks, she is clean underneath as she is on top, next weekend will be a woxoyl fest as well as re-directing sunroof drains, and im going to have a bash at making some rear arch liners. l really appreciate having a clean metro now as we all know there not easy to find | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | vvc warrior - 18/4/2010 10:02 PM a very clean R100, looks sweet as Thanks for the tips on removing the sub frame, alot easier then i thought, quicker then removing bit by bit also enabled me to clean engine bay up alot easier | ||
vvc warrior |
| ||
Retired Admin Posts: 15557 Location: Co. Durham North East | R100_vvc - 17/4/2010 10:22 PM vvc warrior - 18/4/2010 10:02 PM a very clean R100, looks sweet as Thanks for the tips on removing the sub frame, alot easier then i thought, quicker then removing bit by bit also enabled me to clean engine bay up alot easier Your welcome, it's amazing how just a few bolts hold it all in the car. the amount of times ive removed the engine and replaced it back in ive lost count and is sometimes a nightmare lining the engine back up to the gearbox. i know i'll never remove an engine out the top againĀ and as you say atleast you can clean the enine bay of all the crap that gets collected there. | ||
FreddieS |
| ||
Elf eating dog breeder Posts: 10531 Location: Guildford | Thats a buetiful R100, really liking the mods to it and the condition is perfect! | ||
SRi_T |
| ||
Elite Veteran Posts: 998 Location: Herts/N London | Thats stunning mate, great find! Is this what you stuck the lightning interior in to? Any further plans? | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | SRi_T - 19/4/2010 12:33 PM Thats stunning mate, great find! Is this what you stuck the lightning interior in to? Any further plans? Yeah lightning interior will be going in, at the moment i have silverstone interior but find them way too hard, its like sitting on concrete. Next plan is enjoy it | ||
SRi_T |
| ||
Elite Veteran Posts: 998 Location: Herts/N London | R100_vvc - 19/4/2010 12:52 PM Next plan is enjoy it Good man thats what its all about! | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | Just a few engine bay pics; The induction sounds awsome inside the car | ||
Pandy |
| ||
Fish freak! MP Admin Posts: 14989 Location: Birmingham | Love that mate, does it work well in the heater box there? would it help scoop in with a metro vent (if you havnt got one) | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | Pandy - 19/4/2010 10:19 PM Love that mate, does it work well in the heater box there? would it help scoop in with a metro vent (if you havnt got one) yeah it seems to work good, nothing but cold air . I have thought about puting gti vents on like u say they are more of a 'scoop'. l have no probs with driving in heavy rain or jet washing. l have put a little peak on it same as the heater motor has. Same set up to what i had on my GTa which allways done well at pod. | ||
Rosso |
| ||
VVC POWER Posts: 510 Location: Skegness, East Coast | seems like a better home for the ecu.. how is that mounted? | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | Basically a bit of sheet metal which bolts to the ecu and bolted to the battery tray. | ||
Alex G |
| ||
Elite Veteran Posts: 929 Location: Maidstone Kent SE UK | Nice idea with the induction feed. I was pondering what to do with mine.... I may just have to copy you | ||
JohnA88 |
| ||
114 GTa Posts: 1982 Location: Chertsey,Surrey | Thought you sprayed my old gta for a min there lol | ||
FreddieS |
| ||
Elf eating dog breeder Posts: 10531 Location: Guildford | Engine bay looks awesome! top work and loving the induction! Looks so tidy and subtle, absolutely love this car, top work! | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | A little update, just bought my new janspeed 160 manifold to replace my current 4 bolt mani and downpipe. Just hope it makes a different for the money they cost. Also now has a piper cat back exhaust system, sounds quite nice not as quiet as i wanted but hey a lot quieter then a sportex and very good quality too. I have now gathered all my bits to convert my r100 into a mk3 GTi replica just need to get my new bonnet and splitter sprayed | ||
Jack of Hearts |
| ||
Track Slag Posts: 5060 Location: Washington | wheres the flexi attach too on the janspeed? | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | Jack of Hearts - 3/9/2010 2:31 PM wheres the flexi attach too on the janspeed? well its originaly designed for a mg zr 160 and you would need a janspeed de-cat pipe which i presume has a flexi with in it. l will modify it my self with a flexi with a direct pipe to the rest of the system | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | Janspeed manifold all fitted, very pleased with the results over a 4 bolt manifold fits snug to the sump. Sounds totaly different, performs very well especialy at high rpm. A few pics of my mk3 GTi conversion, not sure what to do with rubbing strips weather to just remove them or put the GTi ones. | ||
Metromartin |
| ||
MP Admin Posts: 17870 Location: Gloucester | That looks lush! like it alot. Much better as a GTi replica! | ||
FreddieS |
| ||
Elf eating dog breeder Posts: 10531 Location: Guildford | Oh my god that thing is clean! | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | Thanks still has its marks hear and there but is very tidy for a tro, starting to cost me an arm and a leg though | ||
Pandy |
| ||
Fish freak! MP Admin Posts: 14989 Location: Birmingham | That does look awesome Ive been contemplating trying a GTi look again | ||
AdrianSi |
| ||
Expert Posts: 8490 Location: Midlands | Very clean! are the arches original? Id defo be tempted to head down the full GTi Rep look with the GTi rubbing strips | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | no it had new arches about 4 years ago by the previous owner still good too, must of done a fairly good job. i have a good set of gti rubbing strips to go on, yeah the grey ones need to go dont match the black bits at all. | ||
SRi_T |
| ||
Elite Veteran Posts: 998 Location: Herts/N London | That looks fantastic sean! I also think the GTi rubbing strips is the way forward. Glad the manifold turned out to be worth the money, keep us updated. | ||
jake_111 |
| ||
Regular Posts: 229 Location: Gloucestershire | looks amazing | ||
CaptSlow |
| ||
Veteran Posts: 394 Location: Sevenoaks, kent | Goes well too! Thanks for the ride on Friday! | ||
Saxokid100 |
| ||
dot dot dot Rally Spec Location: Northwest | Thats well clean little tro you have | ||
RobertoMiley |
| ||
The Economist Posts: 1535 Location: Brum Southside | looks awesome mate. keep up the good work... | ||
stormgreygti |
| ||
Roversport replica Posts: 1788 Location: Norfolk | IMO that looks fantastic as a gti rep, much better than the r100's The side strips would finish it off nicely. The paint work looks mint. | ||
Gandi69 |
| ||
Expert Posts: 11052 Location: Wolverhampton | Could pass for a late GTi too being an M plate | ||
RobertoMiley |
| ||
The Economist Posts: 1535 Location: Brum Southside | yea. go for the gti badge on the back as well if you can get hold of one, you want rid of all evidence this was a R114 bar the log book/ chasis no. | ||
Alex G |
| ||
Elite Veteran Posts: 929 Location: Maidstone Kent SE UK | Great job mate - looks like a totally different car | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | Alex G - 4/10/2010 5:47 PM Great job mate - looks like a totally different car Thanks, Have you got yours on the road yet? | ||
Alex G |
| ||
Elite Veteran Posts: 929 Location: Maidstone Kent SE UK | LOL - no. I drove it down to my new gaff, 1 mile away, stuck it in the garage and have since done nothing else. Been too busy doing new house stuff. It drove well, although maybe just a tad too low, and the indicators and rev counter dont work Hopefully I'll have it sorted and MOTed within a few weeks | ||
wana_metro_gti |
| ||
if its got tits or tyres then its gonna be trouble! Posts: 1672 Location: flat out in the 160'd r100 | daaaaaaamn thats clean. health to enjoy fella!! | ||
Levi |
| ||
New user Posts: 11 Location: Lisboa, Portugal | Old school Metro, I like it!Ā Congrats, Levi. | ||
DazzR100 |
| ||
Regular Posts: 194 Location: Birmingham City. | Oh yes very nice, I want one | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | l thought i would try and double up the rear anti-roll bar, seems to work well. The rear end feels much tighter. Also coloured the MG badge on the steering wheel | ||
Saxokid100 |
| ||
dot dot dot Rally Spec Location: Northwest | very nice...... | ||
Jack of Hearts |
| ||
Track Slag Posts: 5060 Location: Washington | I've been reading more and more into this doubled up rear arb, how did you attach it the the arm? | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | sorry pics are crap but i didnt fix the sceond arb to the arm, its basically a standard gti arb fitted as per normal then a second gti one attached with spacers as pictured and jubilee clips clamping it together. l chopped the ends off the second arb just short of the drop links so it doesnt interfere with the drop links of the original arb lt really has improved the handling wish i done it earlier Edited by R100_vvc 4/4/2011 9:07 AM | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | New wheels, they are as good as new very pleased with them And just a pick of me daily runner gsi, only the interior | ||
111Sli |
| ||
Transport Guru MP Moderator Posts: 4947 Location: Bromley, Kent | Sean, if you ever want to sell that GSi, can I be top of the list. Seriously. | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | 111Sli - 19/5/2011 10:19 PM Sean, if you ever want to sell that GSi, can I be top of the list. Seriously. no problem, i want to tidy it up first. Being a R reg it has alot of surface rust which needs attending to before it rots out | ||
Turley_vvc |
| ||
Posts: 2794 Location: Tamworth/Measham | You sneeky f-ing sh*t lol u got them wheels, 1 of my fav gti reps, really nice mate and the paint work is stunnin mate | ||
111Sli |
| ||
Transport Guru MP Moderator Posts: 4947 Location: Bromley, Kent | R100_vvc - 19/5/2011 10:29 PM 111Sli - 19/5/2011 10:19 PM Sean, if you ever want to sell that GSi, can I be top of the list. Seriously. no problem, i want to tidy it up first. Being a R reg it has alot of surface rust which needs attending to before it rots out The later R100s really seem to rust more than the older A series Metros. Some of the R reg 100s have gold awful wheel arches, whereas the A series don't tend the rust on the arches so bad... You need to gadget that car up Sean. Get some radio controls and MGF mirror etc... plus adjustable headlamps if it hasn't already got them? Edited by 111Sli 19/5/2011 2:37 PM | ||
stormgreygti |
| ||
Roversport replica Posts: 1788 Location: Norfolk | Those wheel really do make it look excellent. The paint work looks mint, very clean. Connor. | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | Turley_vvc - 19/5/2011 10:35 PM You sneeky f-ing sh*t lol u got them wheels, 1 of my fav gti reps, really nice mate and the paint work is stunnin mate lol it was thanks to you for putting the link up, i wasnt searching for any wheels Cheers though | ||
Turley_vvc |
| ||
Posts: 2794 Location: Tamworth/Measham | R100_vvc - 19/5/2011 2:47 PM Turley_vvc - 19/5/2011 10:35 PM You sneeky f-ing sh*t lol u got them wheels, 1 of my fav gti reps, really nice mate and the paint work is stunnin mate lol it was thanks to you for putting the link up, i wasnt searching for any wheels Cheers though No problem, looks top notch on yours tho mate realy nice, did you have it resprayed or mopped back up? | ||
RobertoMiley |
| ||
The Economist Posts: 1535 Location: Brum Southside | R100_vvc - 19/5/2011 10:47 PM Turley_vvc - 19/5/2011 10:35 PM You sneeky f-ing sh*t lol u got them wheels, 1 of my fav gti reps, really nice mate and the paint work is stunnin mate lol it was thanks to you for putting the link up, i wasnt searching for any wheels Cheers though good buy mate I would have snapped them up if I had the funds available at this time, they look really good! edit: what you going to do with your TD motorsports? Edited by RobertoMiley 19/5/2011 2:53 PM | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | stormgreygti - 19/5/2011 10:38 PM Those wheel really do make it look excellent. The paint work looks mint, very clean. Connor. Thanks, paint work is tidy but its not factory fresh like some examples on here as it was only a cheap re-spray on the sides to get all the car one colour and not loads of different shades. Either way for an old tro she looks good | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | RobertoMiley - 19/5/2011 10:51 PM R100_vvc - 19/5/2011 10:47 PM Turley_vvc - 19/5/2011 10:35 PM You sneeky f-ing sh*t lol u got them wheels, 1 of my fav gti reps, really nice mate and the paint work is stunnin mate lol it was thanks to you for putting the link up, i wasnt searching for any wheels Cheers though good buy mate I would have snapped them up if I had the funds available at this time, they look really good! edit: what you going to do with your TD motorsports? cheers i have already sold the KN's | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | After driving my cousins rover 100 turbo, l thought i say good bye to the faithful VVC. l bought a rover 75 turbo few weeks ago with a nice low mileage of 34,000 miles. Still on its original head gasket which makes a change! This morning i put the engine in to see what space i dont have left once the turbo is fitted, As you can see the really is not alot, i did want to use a front-mounted intercooler but with the metro mk3 bumper this is near impossible, unless i have it hanging out the front but l dont want that. Found some good charge coolers in America which is where i will probably get mine as there a fair bit cheaper then the ones over here. | ||
djwilma |
| ||
Expert Posts: 2812 Location: Bournemouth | Easiest and cheapest would be to convert it back to a Rover 100 front end ! Otherwise looking good be good to see it again, and not get beat | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | this is the charge cooler im going to buy http://www.ebay.co.uk/itm/110589931917?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649 l like my metro front end, The cooler rad in that link is only 1" thick and it will be more efficent then a front mount air-cooler | ||
Turley_vvc |
| ||
Posts: 2794 Location: Tamworth/Measham | Good work and that cooler looks good mate and im having trouble aswell Sean with the front mount once i supercharged mine BUT and thats a big BUT i might get away with it as the Charger is located in a differnt place compared to wer your Turbo is | ||
SRi_T |
| ||
Elite Veteran Posts: 998 Location: Herts/N London | Good on ya Sean, good to see something a little different! I'll be keeping an eye on this thread, best of luck with it. | ||
AdrianSi |
| ||
Expert Posts: 8490 Location: Midlands | Thats one chuffing clean block you have there!! I'll be following this one as I really feel I should add more power to the new SI sheel | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | Thanks for the replys, i was getting bored of vvc tbh and putting the turbo engine in should bring back the fun again, even if it has the same horespower as my old vvc the torque is what you feel. Adrian you should do it, easy conversion once you sort out what intercooler you use | ||
jon8oy |
| ||
now on 2 wheels Posts: 7576 Location: back in longbridge b31 | ive nearly finished my turbo conversion it runs any way its in the body shop now been preped i know what you mean about the mk3 front end no room for a front mount | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | My charge cooler turned up today from USA, i decided to use a barrel type cooler which is nearly 14" long and has 3" inlet and outlet pipes. My charge cooler radiator is going into my unused spare wheel well and it will have a letter box size type vent front and rear of the wheel well with the radiator enclosed in a channel. The large ice box is going to be mounted on top of my rear inner arch and this will be my reservoir. | ||
djwilma |
| ||
Expert Posts: 2812 Location: Bournemouth | nice idea you gonna had rad on an angle and the fan on all the time ? | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | djwilma - 9/11/2011 6:47 PM nice idea you gonna had rad on an angle and the fan on all the time ? Yeah thats right rad will sit at a 45 degree angle. Fan will probably only need to be on when im giving it some stick, apart from that i hope it will have a half decent air flow. Time will tell | ||
111Sli |
| ||
Transport Guru MP Moderator Posts: 4947 Location: Bromley, Kent | Wow Sean, this looks epic! Bagsy a ride when it's all done! lol | ||
muzza |
| ||
Nutta With An Orange Grille Posts: 5280 Location: Who put that pit there keep falling down :( | You are going to have real trouble keeping the charge rad cool looked into it hence why I have 5 rads on my charge system to keep the temps acceptable it needs to have very good airflow personally I'd have a front mount charge rad I can fit a twin core rad and a charge rad with lots of space remembering I've got BRM grill which takes up loads of space ! | ||
djwilma |
| ||
Expert Posts: 2812 Location: Bournemouth | muzza - 8/11/2011 8:03 PM You are going to have real trouble keeping the charge rad cool looked into it hence why I have 5 rads on my charge system to keep the temps acceptable it needs to have very good airflow personally I'd have a front mount charge rad I can fit a twin core rad and a charge rad with lots of space remembering I've got Brum grill which takes up loads of space ! i know nothing of charge cooling but i wouldnt go twin core on a rad, a single fat core will disapte more heat as the second pass gets much hotter air so doesnt cool and its a vicous circle. | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | Yeah l can understand what your saying, i will try to see if i can mount it on the front before i get my grinder out. But having it in the rear will have its plus side with it allowing me to use a large 5L resevoir tank, copper pipes under the floor (outside) taking the fluid from front to rear with 16mm pipe work (aids cooling on the way) and a 12"x 12" x 2"inch core rad. l have worked out i will have about 8-9 litres of cooling fluid in the system and it will take alot of boosting to heat all that water up, and 99% of the time it is used on the road. Also it will leave my engine radiator in a clearer path of air rather then covered by another radiator Edited by R100_vvc 9/11/2011 12:25 PM | ||
CaptSlow |
| ||
Veteran Posts: 394 Location: Sevenoaks, kent | Have you thought about using MG TF under floor coolant pipes? Can get stainless one quite cheaply too | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | CaptSlow - 9/11/2011 8:41 PM Have you thought about using MG TF under floor coolant pipes? Can get stainless one quite cheaply too cheers mate but l was going to use copper plumbing pipe, simple and cheap tbh | ||
CaptSlow |
| ||
Veteran Posts: 394 Location: Sevenoaks, kent | If you need to get flares put on the end of the pipes let me know, as i have a mate that has the tool to do it. | ||
muzza |
| ||
Nutta With An Orange Grille Posts: 5280 Location: Who put that pit there keep falling down :( | djwilma - 9/11/2011 8:08 PM muzza - 8/11/2011 8:03 PM You are going to have real trouble keeping the charge rad cool looked into it hence why I have 5 rads on my charge system to keep the temps acceptable it needs to have very good airflow personally I'd have a front mount charge rad I can fit a twin core rad and a charge rad with lots of space remembering I've got Brum grill which takes up loads of space ! i know nothing of charge cooling but i wouldnt go twin core on a rad, a single fat core will disapte more heat as the second pass gets much hotter air so doesnt cool and its a vicous circle. Car rad is twin core charge rads are single core | ||
djwilma |
| ||
Expert Posts: 2812 Location: Bournemouth | sorry badly written, twin core coolant for the engine rad is in my opinion a no no. | ||
muzza |
| ||
Nutta With An Orange Grille Posts: 5280 Location: Who put that pit there keep falling down :( | Hmm why's that pm me so as not to spam thread | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | Made my scoop today at work, decided im going to have the radiator laying flat on the bottom of the spare wheel well. Just need to get the radiator mounted in this weekend then form the top half of the channel for the air to exit out the rear. | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | Sorry but no pictures yet! will try get some at the weekend. But its all up and running well has been since the end of December. lm very happy with the result of the turbo engine and ZandF map all very quiet and smooth power. Charge cooler rad is in the spare wheel well laying flat with my scoop welded underneath and exit hole at the rear. The cooler barrel stays cold to the touch in the engine bay and the hottest i have had the water after a bit of lead foot action is luke warm at best and thats with out the help of a fan. lm running standard metro radiator, which unfortunatly is not really up to the job so will fit the Talon rad i have. Other then that it has all fitted well and still looks like a normal metro mk3 | ||
SRi_T |
| ||
Elite Veteran Posts: 998 Location: Herts/N London | Good work mate, how does the car feel compared to your old vvc? Look forward to seeing some pics and maybe a video in action I bet you can't wait to get it down Santa pod, any guesses how quick she might be down the quarter? | ||
djwilma |
| ||
Expert Posts: 2812 Location: Bournemouth | Welcome to the turbo club.....Santa Pod here we come | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | l dont know what power its putting out, but its quite a big difference compared to my old vvc especialy the amount of torque. Lm still running a 2" exhaust which is probably a little small for it so will be getting a custom 2.5 from turbo back as the standard turbo downpipe looks large but has a insert inside which makes 1 3/4" inside diameter Yes Dylan look forward to beating you again l recon i could do a 13.6 or 13.5 quarter mile if i launch her right. | ||
djwilma |
| ||
Expert Posts: 2812 Location: Bournemouth | Ā£5 says you won't get under 14 It won't launch like your vvc | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | djwilma - 9/1/2012 11:31 PM Ā£5 says you won't get under 14 It won't launch like your vvc Might as well do it proper, i bet you the Ā£25 to go up the strip i will see 13's | ||
munday |
| ||
Expert Posts: 5629 Location: Letchworth/Basildon | |||
djwilma |
| ||
Expert Posts: 2812 Location: Bournemouth | R100_vvc - 9/1/2012 7:37 AM djwilma - 9/1/2012 11:31 PM Ā£5 says you won't get under 14 It won't launch like your vvc Might as well do it proper, i bet you the Ā£25 to go up the strip i will see 13's Ok, but for 25 you have to beat 13.8.......money well spent if you do as iirc that will be the quickest 1/4 mile time And the bet is for the year not just Feb meet and needs video evidence. | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | l Gave the car a quick buff up today whilst the weather is good, and got a few engine bay picks | ||
SRi_T |
| ||
Elite Veteran Posts: 998 Location: Herts/N London | That look really neat Sean, good work. Looking forward to hearing how you do at Santa pod. | ||
Turley_vvc |
| ||
Posts: 2794 Location: Tamworth/Measham | Is a very clean car | ||
DAVESEI |
| ||
previously known as....Dazgta Posts: 2019 Location: birmingham | MINT | ||
AdrianSi |
| ||
Expert Posts: 8490 Location: Midlands | Looks tidy that Sean! Liking the stealth radiator install there VVC inlet manifold? | ||
FreddieS |
| ||
Elf eating dog breeder Posts: 10531 Location: Guildford | Love it! also love the double up rear arb, I need to fit one first lol Really like how subtle the install is, no real giveaway at all that its got a turbo lump! | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | Cheers all! still got loads of little bits and bobs to do like enclosed filter routed back to my heater box, 255 fuel pump along with a turbo back exhaust. VVC inlet mani not too sure on, as i would thought the miss match to inlet ports may slow the flow but will try in the near future. Freddie the twin arb i feel makes a nice difference, though muzza's way of fitting the mgf front arb i think would be a better option as they are larger dia and saves chopping up the rarer Gti arb. Edited by R100_vvc 22/1/2012 9:37 PM | ||
djwilma |
| ||
Expert Posts: 2812 Location: Bournemouth | R100_vvc - 22/1/2012 5:37 AM Cheers all! still got loads of little bits and bobs to do like enclosed filter routed back to my heater box, 255 fuel pump along with a turbo back exhaust. VVC inlet mani not too sure on, as i would thought the miss match to inlet ports may slow the flow but will try in the near future. Freddie the twin arb i feel makes a nice difference, though muzza's way of fitting the mgf front arb i think would be a better option as they are larger dia and saves chopping up the rarer Gti arb. Sean looking good, but get it dirty ffs You don't need to upgrade the fuel pump unless your going north of 275bhp and your double arb worked a treat and easier than the front.mgf Roll on Santa pod | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | lt was dirty lol i hadn't polished it since summer last year. The map is set to have 3.5 bar, the pump is doing it but you can hear it struggle when you turn ignition it primes slowly. Daz has a 255 pump in his and the pump is just cruising with no strain at all. So best to be safe. | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | Can Admin change my journal title to Rover 100 Turbo Thank you | ||
Cake_Destroyer |
| ||
formerly p319 hok Posts: 1965 Location: Under a car somewhere | Tbh I'm jealous Love the red gti look, comps look PORN, just great pal, nice bay too We dont want nice wuiet smooth power lol, want to see Dylan's rip your face off, confuse your brain, rattle your eardums, vibrate your balls, roost past JoH and fill your pants WOW power | ||
Jack of Hearts |
| ||
Track Slag Posts: 5060 Location: Washington | p319 hok - 22/1/2012 11:20 PM Tbh I'm jealous Love the red gti look, comps look PORN, just great pal, nice bay too We dont want nice wuiet smooth power lol, want to see Dylan's rip your face off, confuse your brain, rattle your eardums, vibrate your balls, roost past JoH and fill your pants WOW power Looks really nice Sean I haven't started putting the punch into the spitfire yet, let's make sure she can fly straight first | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | p319 hok - 22/1/2012 11:20 PM Tbh I'm jealous Love the red gti look, comps look PORN, just great pal, nice bay too We dont want nice wuiet smooth power lol, want to see Dylan's rip your face off, confuse your brain, rattle your eardums, vibrate your balls, roost past JoH and fill your pants WOW power HaHa, i use to have a proper original mint red Gti on a M Plate (one of the last) long before i found metropower, but made a massive mistake and sold it im hopeing to sort out the quietness with my new exhaust which will only have one box instead of two and will be 2.5" The engine is completely standard at the mo and it is a fresh slate for tuning. Just need more time and money. | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | Jack of Hearts - 22/1/2012 11:25 PM p319 hok - 22/1/2012 11:20 PM Tbh I'm jealous Love the red gti look, comps look PORN, just great pal, nice bay too We dont want nice wuiet smooth power lol, want to see Dylan's rip your face off, confuse your brain, rattle your eardums, vibrate your balls, roost past JoH and fill your pants WOW power Looks really nice Sean I haven't started putting the punch into the spitfire yet, let's make sure she can fly straight first Cheers John, loving the boost, but iam starting to miss the scream of a vvc through a janspeed l might even PG1 it this year! | ||
Jack of Hearts |
| ||
Track Slag Posts: 5060 Location: Washington | Credit where it's due mate, I love the radiator location. More weight out of the front and put into the back I'll help with the r65 removal if you want? | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | Thank you for the offer lol, mainly want pg1 for Lsd as r65 lsd costs 400 quid so will be cheaper to find pg1 with lsd in the future. ln the mean time a fat person in the passenger seat will have to do | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | Head gasket time! water system was pressurizing so removed the head. l sent it away for a light skim as the head had very slight indentation on the exhaust side of the head. Got it back today, gave everything a good clean up. i strip down all the hydraulic lifters and cleaned out all the old oil, very boring job that was Then put it all back together ready to go on tommorrow. | ||
djwilma |
| ||
Expert Posts: 2812 Location: Bournemouth | Sean what head gasket are you going to fit And sorry about the HGF | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | i have bought the old style silicone bead gasket, why's that? | ||
djwilma |
| ||
Expert Posts: 2812 Location: Bournemouth | R100_vvc - 21/2/2012 2:46 AM i have bought the old style silicone bead gasket, why's that? just asking, been speaking about it today with a friend. You could fit an MLS Where was the head gasket gone | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | djwilma - 21/2/2012 6:51 PM R100_vvc - 21/2/2012 2:46 AM i have bought the old style silicone bead gasket, why's that? just asking, been speaking about it today with a friend. You could fit an MLS Where was the head gasket gone l know i could fit a mls but i just prefer the original stlye as i have had issues of external leaking after fitting mls to my previous k series engines (more then likely down to cheap imitation mls gaskets from ebay) also i find the silicone bead type last just as long (10 years old the one i removed). Having a light skim shouldn't give me problems with my compression ratio should it? From what i could see on the old gasket, it looked like it was creeping past the fire ring on one cylinder as there was like a area where the carbon build up was missing. Where as the other 3 rings had a consistant line of carbon all the way round the ring of the gasket. Quite hard to see but then it was a very minor leak. | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | lnspired by QED's remote thermostat which goes in the top hose, i decided to ditch the more complex PRT set up and modify a early k series thermostat housing to do the job. pick of QED's http://qedmotorsport.co.uk/qed-shop/rover-k-series/misc/qed-remote-thermostat-housing Firstly i cut short the old heater feed and welded it up, then fitted a suitable nipple for the bleed off pipe which will return to the header tank. Edited by R100_vvc 23/2/2012 7:12 PM | ||
R119GTA |
| ||
Metro Mad Posts: 7653 Location: Tamworth, Staffs | Not bad, abit different too Would recommend that you remove the inner rib of the top section of the outlet that would normal retain the o-ring seal and maybe taper the outer rib other wise the coolant hose wont get a good seal when clamped on. | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | Headgasket all done and running as it should be Also fitted a 2 1/2" turbo back exhaust system and has given it much more torque and better pull right up to the limitor. l bought the exhaust off my cousin who is going down a different route of exhaust now. Only picture of my exhaust is on his car, which he is currently giving the floor a revamp. | ||
mini-mad-craig |
| ||
Elite Veteran Posts: 978 Location: Walderslade, Kent | Bump for Seans project. Proper tidy little car and a true legend of the Metro scene to me, always puts himself out to help me and is more than happy to help out when it comes to anything metro related... if everybody was like Sean car scenes would be a lot nicer place | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | l had problems with my fuel regulator not holding consistant pressure, so bought a new adjustable one similar to Muzza's which fits in the standard turbo fuel rail with a little modding. This morning l went to BD enginering to have the fueling set up and had a few power runs. Results were 206 bhp (taken upto the limitor) and 195 lbft of torque. His printer is broken so i will have to wait till next week for a print out and will post it up Edited by R100_vvc 28/4/2012 11:36 AM | ||
AdrianSi |
| ||
Expert Posts: 8490 Location: Midlands | That is a seriously impressive figure! Looks like I'll be bolting my turbo engine together! | ||
djwilma |
| ||
Expert Posts: 2812 Location: Bournemouth | Oh do I win a prize, said it would be over 200bhp and as I always said this is the perfect metro Forged rods, pistons with std crank gt2560 and you will see a reliable 250bhp Just bought me a 1.8 turbo for the mini, that's how impressed I am with this car..... | ||
dazz 111 |
| ||
Extreme Veteran Posts: 592 Location: kent | i have some shorter conrods for sale =D | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | Cheers people,l couldnt recommend the conversion enough, the bloke at the rolling road was really impressed with its perfomance. He was telling me how most turbo engined cars bhp drops off well before the limitor and said how well the K turbo keeps on pulling right to the limitor. l still want to get an uprated boost solenoid as i could see in the graph on the screen a dip around 3500rpm where the boost spikes and the ecu over compensates (due to slow acting standard solenoid) cutting the boost back down. Other then that she is perfect and certainly feels like a 200+ bhp metro to drive Edited by R100_vvc 28/4/2012 6:07 PM | ||
SRi_T |
| ||
Elite Veteran Posts: 998 Location: Herts/N London | R100_vvc - 29/4/2012 2:06 AM Cheers people,l couldnt recommend the conversion enough, the bloke at the rolling road was really impressed with its perfomance. He was telling me how most turbo engined cars bhp drops off well before the limitor and said how well the K turbo keeps on pulling right to the limitor. l still want to get an uprated boost solenoid as i could see in the graph on the screen a dip around 3500rpm where the boost spikes and the ecu over compensates (due to slow acting standard solenoid) cutting the boost back down. Other then that she is perfect and certainly feels like a 200+ bhp metro to drive Great stuff Sean, I'd be happy with that result, it certainly feels like a 200bhp + metro! | ||
Alex G |
| ||
Elite Veteran Posts: 929 Location: Maidstone Kent SE UK | That's some cracking work there mate, great to see 200bhp | ||
Jack of Hearts |
| ||
Track Slag Posts: 5060 Location: Washington | That's brilliant work fella | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | l fitted another regulator (fse) went down to the rollers this morning and have managed to get a better curve as a result of better fueling, 207 bhp at the fly with 173bhp wheel hp a little less torque @ 189.4 lbft. | ||
AdrianSi |
| ||
Expert Posts: 8490 Location: Midlands | Your graphs speak a 1000 words. I can almost certainly see me doing this conversion on my SI! | ||
djwilma |
| ||
Expert Posts: 2812 Location: Bournemouth | The torque at 1900rpm is more than a vvc has Adi when I saw this I went home and bought a 1.8 turbo engine, impressive is an understatement | ||
beany113 |
| ||
Veteran Posts: 459 Location: sittingbourne, kent | this is probably the best example of a metro i have seen, its even better than someone like sean owns it, couldnt find a nicer lad! top work mate | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | Fitted new radiators this weekend inc mods to lower front panel. Engine rad is mgf, charge cool rad is fiat cinquecento. The bumper sits a bit better now compared to the Talon twin core rad which i had. charge cooler rad With the bumper back on with the two rads fitted | ||
ding |
| ||
Dumb question, but are you using a fan on this? | |||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | yes its a 12" slim fan on the rear of the rad (drivers side) | ||
ding |
| ||
Sorted. I'll get one | |||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | Now rolling on MPI wheels and toyo r888's love the amount of grip they give me compared to any tyre i have ever had Was ment to go to santapod at the weekend just gone but gave it a miss as the weather didnt look to good on the forecast, but im pretty certain i could run late 12's as it currently stands. l will have to wait until next year now.. | ||
AdrianSi |
| ||
Expert Posts: 8490 Location: Midlands | R100_vvc - 30/10/2012 10:00 PM Now rolling on MPI wheels and toyo r888's love the amount of grip they give me compared to any tyre i have ever had ...and how do you find the flex on the 60 profile tyres? Feels great with such an immense amount of grip. Tried them in the wet yet? | ||
Gandi69 |
| ||
Expert Posts: 11052 Location: Wolverhampton | I like mpi rims now, pretty standard looking so complete sleeper! | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | Yes driven them in the wet which i find they still grip very well, the 60 profile is fine as these have very stiff side walls but is quite a bumpy ride compared to the 55 profile road pro's i just taken off | ||
pqhf5kd |
| ||
Elite Veteran Posts: 703 Location: New Milton, Hampshire | Top build Do you no longer have the spare wheel mounted cooler now you have the Cinq cooler? | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | pqhf5kd - 17/1/2013 9:37 AM Top build Do you no longer have the spare wheel mounted cooler now you have the Cinq cooler? no thats gone now, lt didnt work to well as the heat from the exhaust/engine in the tunnel blew straight into my scoop. Cinq rad is more then enough, l done 50 laps on track and never any heat in the charge barrel. | ||
pqhf5kd |
| ||
Elite Veteran Posts: 703 Location: New Milton, Hampshire | R100_vvc - 17/1/2013 10:17 AM pqhf5kd - 17/1/2013 9:37 AM Top build Do you no longer have the spare wheel mounted cooler now you have the Cinq cooler? no thats gone now, lt didnt work to well as the heat from the exhaust/engine in the tunnel blew straight into my scoop. Cinq rad is more then enough, l done 50 laps on track and never any heat in the charge barrel. Sounds good Will you be a PoL? Hope you don't mind me copying your setup | ||
djwilma |
| ||
Expert Posts: 2812 Location: Bournemouth | R100_vvc - 16/1/2013 6:17 PM pqhf5kd - 17/1/2013 9:37 AM Top build Do you no longer have the spare wheel mounted cooler now you have the Cinq cooler? no thats gone now, lt didnt work to well as the heat from the exhaust/engine in the tunnel blew straight into my scoop. Cinq rad is more then enough, l done 50 laps on track and never any heat in the charge barrel. I am saying nothing Best metro ever though.... | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | Yes i will be at pol, if i dont crash it in march at castle combe | ||
pqhf5kd |
| ||
Elite Veteran Posts: 703 Location: New Milton, Hampshire | Lets hope not! I can't see any Cinq rads that look like yours you haven't got a part number or some more info by any chance? EDIT http://www.ebay.co.uk/itm/Radiator-Fiat-Seicento-1-1MPi-1998-2004-Manual-Petrol-/330799740149?pt=UK_CarsParts_Vehicles_CarParts_SM&fits=Car+Make%3AFiat%7CModel%3ASeicento&hash=item4d053374f5 Lenght: 450mm; Width: 285mm; Height: 42mm Looks like the one Edited by pqhf5kd 17/1/2013 5:46 PM | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | http://www.ebay.co.uk/itm/FIAT-CINQUECENTO-1993-1999-SEICENTO-1998-2000-RADIATOR-NEW-2-YEAR-WARRANTY-/290772781169?pt=UK_CarsParts_Vehicles_CarParts_SM&fits=Car+Make%3AFiat%7CModel%3ACinquecento&hash=item43b3688871 you have to cut the chunky bit off the other end of it, and blank off a bleed off tube all easy to do though Edited by R100_vvc 17/1/2013 5:56 PM | ||
pqhf5kd |
| ||
Elite Veteran Posts: 703 Location: New Milton, Hampshire | Great thanks How did you do the blank? I'm not sure what the pressures like in a charger cooler, wouldn't be good if it blow the blank off. | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | Self tapping screw with a rubber washer, there is no pressure in the system as it wont or shouldn't get hot to expand. The water pump is quite powerful so wants to be as good as u can get it. | ||
DAVESEI |
| ||
previously known as....Dazgta Posts: 2019 Location: birmingham | just had my second w.ank to a metro my first was a black lotus tro | ||
Alburglar |
| ||
Veteran Posts: 401 Location: Dover, Kent | Lol at davesei | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | Fitted a rover kv6 water to oil cooler. l used a sandwhich plate oil cooler kit from ebay and welded 2 barbed connectors to the pipes on the cooler to link it up to the sandwhich plate with 2 short hoses. Tight fit but its in there | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | Also bought some smart looking 5 spokes off G-shaw which i plan to use for daily road use, just need to get some bigger tyres them | ||
AdrianSi |
| ||
Expert Posts: 8490 Location: Midlands | Nice work using the rover parts bin! Only thing i would say is heatshield on that manifold? | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | Yeah I have been thinking of a heat shield to cover the nasty looking manifold up. | ||
donnac |
| ||
Member Posts: 82 Location: Edinburgh | This car is awesome, I may end up going down the same route with a good r100 shell with my gti parts, will hopefully see it a a show one day | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | Seems i was a bit late fitting a oil cooler to my engine as since driving round lydden track november the engine had developed a knocking from the bottom end which started to show when i got it out this year. So i started to fully re-build the engine which included new pistons/liners, new bearings through out, new cylinder head, new high flow oil pump and full gasket set. l have just finished building it back up this weekend after i got my pistons fitted to my rods which i didnt fancy trying. Block was fully washed, crank was checked no problems, old pistons checked again no problems and the bearings seem to look normal in wear so no sure what was knocking? new bearings fitted new pistons and liners and payen gasket New head with water ways opened up New genuine oil pump bargain 25 quid delivered of ebay some fancy exhaust and inlet studs All back together again | ||
AdrianSi |
| ||
Expert Posts: 8490 Location: Midlands | Nice! | ||
munday |
| ||
Expert Posts: 5629 Location: Letchworth/Basildon | Good work dude, like your tractor too...Want to race ours? | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | You got no chance she's fitted with a 5 litre ford lorry engine | ||
munday |
| ||
Expert Posts: 5629 Location: Letchworth/Basildon | R100_vvc - 22/4/2013 11:14 AM You got no chance she's fitted with a 5 litre ford lorry engine Shit man, better VVC it | ||
Paul r |
| ||
Extreme Veteran Posts: 539 Location: Swindon, Wilts | Out of curiosity why dont you use thd vvc inlet manifold? Top build as well, I have future plans for this conversion but to use a gt2056vnt instead of the gt2052. | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | I have thought about it but would need the ports matching to make it worth while, but tbh I'm happy with how performs as it is | ||
Alburglar |
| ||
Veteran Posts: 401 Location: Dover, Kent | Perhaps the vvc mechanisms knocking? | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | It's a 1.8 solid cam engine and the noise could be heard from the sump http://m.youtube.com/#/watch?feature=plcp&v=970tfeNnepU Edited by R100_vvc 25/4/2013 7:16 AM | ||
Alburglar |
| ||
Veteran Posts: 401 Location: Dover, Kent | End float on the crank? | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | Done some more work on the car tonight, now are workshop is clear of tractors and shit we can spread out Engine fitted back on my new powder coated subframe along with Mgf bottom arms, mgf rear cans, steering arms and track rods ect along with new poly bushes in every bush that can be. Also fitted new genuine top arms and bearing, new genuine engine mount and bolts where it was needed.. Fed up with my brown bottle i got a nice new one Ready to roll back under fitted mgf Gas shocks, Ralph's top mounts and stainless bottom bolt, titainium drive shaft nuts, stainless drop links and alloy rear arb drop links. Painted the inner arches with hammerite red. just got to plug engine all in and fingers cross it will run | ||
cliffordliam |
| ||
Green machine! Posts: 585 Location: Bromley, Kent | Knew you couldn't resist a new coolant bottle | ||
111Sli |
| ||
Transport Guru MP Moderator Posts: 4947 Location: Bromley, Kent | cliffordliam - 9/5/2013 9:56 PM Knew you couldn't resist a new coolant bottle What I was going to say. Lol Nice work Sean, top notch as always. | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | Had to be done, nearly took it back out the basket at the checkout on rimmerbros but thought once there gone there gone, so thought i'd better Edited by R100_vvc 9/5/2013 10:11 PM | ||
djwilma |
| ||
Expert Posts: 2812 Location: Bournemouth | I still dont see an oil cooler | ||
AdrianSi |
| ||
Expert Posts: 8490 Location: Midlands | Looking damn tidy! New expansion tank with with a tag too How much were the gas shocks? Im on standard MGF's atm and should really upgrade for track work! | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | djwilma - 10/5/2013 9:04 AM I still dont see an oil cooler Oil cooler can be seen on previous page at the bottom, the gas shock are made by trw And cost 80 quid delivered, feel much stiffer compared to Gti standard shocks | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | Back out driving it today, so far so good. Little video injectors make it sound noisy but its Very quiet and no knocking http://m.youtube.com/#/watch?feature=youtube_gdata_player&v=9pPB6GIkHFs&desktop_uri=%2Fwatch%3Fv%3D9pPB6GIkHFs%26feature%3Dyoutube_gdata_player | ||
GoldRush |
| ||
Accident Prone! Posts: 325 Location: Isle Of Wight | Nice build and what's the difference with the mgf cans ? | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | Should give a little more damping over standard metro front cans | ||
GoldRush |
| ||
Accident Prone! Posts: 325 Location: Isle Of Wight | Oright wondered why every one does it | ||
AdrianSi |
| ||
Expert Posts: 8490 Location: Midlands | Sounds a treat mate, great achievement | ||
Morey |
| ||
Events Organiser MP Admin Posts: 1923 Location: Somerset | Sean, in my eyes this car of yours is a credit to you mate. It's epic! Not only that but I personally think your taking the metro scene into a whole new world of power. In 10 years time I can see everyone going more for the turbo conversion Keep up the good work | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | Thanks, but Dylan brought it to light when he done his, and a lad a few years back done it but not heard of that one For ages after he had engine trouble when mapping it. Me and daz could of been the first to bolt a 1.8t to a R65 though | ||
Morey |
| ||
Events Organiser MP Admin Posts: 1923 Location: Somerset | R100_vvc - 14/5/2013 1:45 PM Thanks, but Dylan brought it to light when he done his, and a lad a few years back done it but not heard of that one For ages after he had engine trouble when mapping it. Me and daz could of been the first to bolt a 1.8t to a R65 though Yes but... yours is constantly drawing attention, on the front page of the journals. Always being worked on and improved, sexy as hell and generally only ever hear about you helping members out! Just take the complimentary abuse you legend! lol | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | Converting to pg1 soon, bought a new 3.7kg flywheel also got a pwr charge cooler radiator which is not as tall as my cinq rad but a good 6 inches wider which may allow for 2 small front mounted fans on the engine rad once fitted. Got poly bushed lower mgf tie bar. Just got to fit it all. Edited by R100_vvc 5/6/2013 8:02 PM | ||
benskoot |
| ||
Regular Posts: 271 Location: Barnsley | Nice. What box are you going for? I have that flywheel in mine | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | I got MGf non vvc box c6 I think, my cousin is using the same box and ratios seem ideal for the turbo and santapod days Edited by R100_vvc 5/6/2013 8:42 PM | ||
benskoot |
| ||
Regular Posts: 271 Location: Barnsley | Yeah I believe that's the box I have, well I got told that. In 5 th I'm at 3k doing 60. You getting a torsen? | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | Not fitting any diff at the mo, think of fitting a quaife diff later | ||
benskoot |
| ||
Regular Posts: 271 Location: Barnsley | Not sure what it's like without one but my turbo with type b torsen grips well. | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | Yeah I'm use to open diff lol, my tyres help me a lot there | ||
GTaddz |
| ||
Expert Posts: 2568 Location: Up in the lakes | benskoot - 5/6/2013 3:58 AM Yeah I believe that's the box I have, well I got told that. In 5 th I'm at 3k doing 60. You getting a torsen? Sounds about right, Im doing around 3200rpm at 70 with a c6 gearset. | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | GTaddz - 6/6/2013 7:19 PM benskoot - 5/6/2013 3:58 AM Yeah I believe that's the box I have, well I got told that. In 5 th I'm at 3k doing 60. You getting a torsen? Sounds about right, Im doing around 3200rpm at 70 with a c6 gearset. Well after the longest pg1 conversion ever I finally got it back out this weekend, and yep 70mph @ 3200rpm so I have the box I was hoping for I fitted or should I say welded a metro uj on the linkage along with metro gear stick as didn't have r200 gear knob to hand. URL=http://s735.photobucket.com/user/seanw9288/media/image.jpg.html] URL=http://s735.photobucket.com/user/seanw9288/media/image-1.jpg.html] All shortened and painted A very dusty looking car just finished putting back together URL=http://s735.photobucket.com/user/seanw9288/media/image-2.jpg.html] After a good wash she's back in the game URL=http://s735.photobucket.com/user/seanw9288/media/image-5.jpg.html] More appropriate sticker from Zandf URL=http://s735.photobucket.com/user/seanw9288/media/image-4.jpg.html] | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | Oh and couldn't get my new charge cooler rad to fit which is a shame but hay ho fiat rad will do, so any one wanting to buy a Avt charge rad cheaper then new price let me know as would sit lovely in the r100 bumper mouth | ||
GTaddz |
| ||
Expert Posts: 2568 Location: Up in the lakes | Good effort! How are you finding that ultralight weight flywheel? A steering uj completely changes the feel of the shift, is it polybush'd too? | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | Engine revs slightly quicker maybe over standard r65 flywheel, can't comment on what it's like to a standard pg1 flywheel, but imagine its a big improvement as its nearly half the weight. Gear shift is very precise with the uj and still got standard bush gear stick end as there was no movement in it. Gear ratios suit the turbo well, just need to re visit santapod to see if it lost or gained speed | ||
benskoot |
| ||
Regular Posts: 271 Location: Barnsley | Looking nice and clean mate.is that the r75 fuel rail fitted? | ||
munday |
| ||
Expert Posts: 5629 Location: Letchworth/Basildon | Awesome work as always, you gotta come to my unit for a BBQ one weekend and teach me how to weld I'll provide burgers and strippers or something | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | munday - 9/7/2013 8:29 AM Awesome work as always, you gotta come to my unit for a BBQ one weekend and teach me how to weld I'll provide burgers and strippers or something Mig welding is easy just point and squirt, learning what setting you want on what thickness etc is key. Yeah BBQ sounds good one weekend or so. Ben it is a r75 rail but with a blank regulator so no different to a standard mpi rail, only used it because looked cleaner | ||
Versatwin87 |
| ||
benskoot - 9/7/2013 7:29 AM Looking nice and clean mate.is that the r75 fuel rail fitted? Yeah it is. Modded to work. | |||
Gandi69 |
| ||
Expert Posts: 11052 Location: Wolverhampton | Lovely looking car this | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | Gandi69 - 9/7/2013 2:39 PM Lovely looking car this Thanks, I got the full Gti spi interior back in now and makes it feel and look a lot better car | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | Now fitted a AEM air fuel ratio gauge, something I should of done earlier.. Very pleased with it, tells you a lot from a few numbers. Previously it use to over fuel in the mid range which could be seen on my rolling road print out a few pages back which I couldn't rid of without making it running leaner at the top end of revs,and this shows on the afr gauge where it goes as low as 10.0-1 afr in between 4-5k. After a few emails to z and f the fuelling is made rich in that area to protect the catalyst from getting to hot. After I explained I had no cat I had a tweaked ecu from them and now the fuelling is consistent to around 11.5 ish on wide open throttle from the bottom to the top on boost and feels like it has a lot more mid range torque Nicely mounted in some satin painted wood caps | ||
munday |
| ||
Expert Posts: 5629 Location: Letchworth/Basildon | Neat install Where abouts do you have the lambda sensor mounted? | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | Cheers, It's on the down pipe inbeteeen bulk head and subframe so it don't get too hot | ||
redgrave66 |
| ||
purple_metty Posts: 2165 Location: leicsestershire | Pure metro porn Sean, i cant see what else needs doing on this one | ||
redgrave66 |
| ||
purple_metty Posts: 2165 Location: leicsestershire | Pure metro porn Sean, i cant see what else needs doing on this one | ||
dazz 111 |
| ||
Extreme Veteran Posts: 592 Location: kent | redgrave66 - 19/9/2013 4:58 PM Pure metro porn Sean, i cant see what else needs doing on this one More powerrrrrrrrrrrrrrrrrrrrrrr! | ||
b155ett |
| ||
Elite Veteran Posts: 624 Location: Sleepy Ol' Suffolk | Don't want to hijack this journal but have a very quick question - Im running a vvc and hgf has happened twice now and was just thinking of costing to move up to the 1.8T Whats the cost from start to finish would you say? Thanks and sorry once again for the hijack. - If you could PM me to save filling the thread up that would be great. Edited by b155ett 22/9/2013 2:40 PM | ||
Paul r |
| ||
Extreme Veteran Posts: 539 Location: Swindon, Wilts | I understand fitting the afr gauge but it is out of sight, why not fit rhs of the dash pod? | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | I had it on the right hand side but was difficult to read, easy to read where it is now. | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | Rub strips on | ||
Gandi69 |
| ||
Expert Posts: 11052 Location: Wolverhampton | this thing looks awesome, hardly anything to give away its running double the power of a normal gti other than 888s | ||
GTaddz |
| ||
Expert Posts: 2568 Location: Up in the lakes | As above, looks gorgeous! Spill the beans then, whats the trick when removing rubstrips? Cant help but think black b pillar vinyls would finish it off nicely. Good work bud! | ||
djwilma |
| ||
Expert Posts: 2812 Location: Bournemouth | Buy some ZZR 185 55 13's you will notice the difference from the 185 60 13's But still the best metro ever.......if no longer the quickest | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | GTaddz - 27/9/2013 3:34 PM As above, looks gorgeous! Spill the beans then, whats the trick when removing rubstrips? Cant help but think black b pillar vinyls would finish it off nicely. Good work bud! I heat the strips up with heat gun then use welding wire like a cheese wire to cut through ( that's the lower strip only) The smaller top half I just use a blade and cut off | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | djwilma - 28/9/2013 2:52 PM Buy some ZZR 185 55 13's you will notice the difference from the 185 60 13's But still the best metro ever.......if no longer the quickest Probably are better, but for 80 quid a corner on the 888's they are a bargain for the grip you can get And they have lasted a year inc santapod and lydden hill ,and they are still slightly above legal limit Edited by R100_vvc 30/9/2013 10:26 PM | ||
djwilma |
| ||
Expert Posts: 2812 Location: Bournemouth | Zzr tyres are similar price In my opinion only the smaller side wall helps, the avon to zzr laps at coombe were night and day.... | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | not much of an update, but fitted my new top tint windscreen and rubber. Massive difference as driving in the sun with my old screen with a million chips was nasty. Fitted some nice black roof gutter trims which gives it a little more detail. Also fitted some new yokohama a048's in 175 60 13, the turn in feel is a lot better and they look a lot less ballon like compared to the 185 60 r888 | ||
t3gav |
| ||
Elite Veteran Posts: 664 Location: Herts | Nice windscreen | ||
Alex G |
| ||
Elite Veteran Posts: 929 Location: Maidstone Kent SE UK | I haven't seen those gutter trims before, they're rather smart. | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | Alex G - 23/7/2014 10:36 PM I haven't seen those gutter trims before, they're rather smart. Normally found on austin metros, these came off my 1.3L but don't worry I have not scrapped my austin just Thought they look better on this | ||
Pandy |
| ||
Fish freak! MP Admin Posts: 14989 Location: Birmingham | Thought about the B Pillar trim? | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | Yeah just not got round to that. l would like to get the whole car painted before I stick on more sticky things. Didn't really want to put the rub strips on yet, but I've got it sussed on removing them so not to much of a problem | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | Fitted a new coil cover, made by someone who call them selves 'Oversport' made from ally. Just need to paint and sand the ribs on the cam cover so it matches | ||
benskoot |
| ||
Regular Posts: 271 Location: Barnsley | Nice addition What is that above your fuel filter? | ||
munday |
| ||
Expert Posts: 5629 Location: Letchworth/Basildon | benskoot - 18/11/2014 10:50 AM Nice addition What is that above your fuel filter? Adjustable fuel pressure regulator | ||
Ryaan |
| ||
Regular Posts: 174 | Is the afr worth having would you say? At the moment I've got oil pressure oil temp and fuel pressure. Don't really want to clutter up the dash anymore if I can ditch one I would. That is If the afr is worth it | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | 100% worth having, a must for a turbo engine id say | ||
b155ett |
| ||
Elite Veteran Posts: 624 Location: Sleepy Ol' Suffolk | im half way through my build and have just noticed that I have the same charge cooler as yourself. how and where did you mount it? im thinking of using the smaller cinq rad for the cooling system???? | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | b155ett - 16/2/2015 9:28 PM im half way through my build and have just noticed that I have the same charge cooler as yourself. how and where did you mount it? im thinking of using the smaller cinq rad for the cooling system???? I have it on a little bracket underneath, basically like a single leg which sat on top of the gearbox. I used cinq rad for the charge cooler rad, not sure it would be up to the job of cooling a 1.8t engine if that's what u ment? | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | Little update. Over Christmas I weighed up the odds to put new arches on mine and get the paintwork to standard I wanted and kinda worked out cheaper to get a really good metro in the colour I wanted. It was also nice to have a fresh slate to work with to correct things that I done on my previous car where I cut holes and welded pieces that were no longer needed. so I bought this 1993 metro quest with 18k on the clock, all original including arches. My old shell I donated to Conner rather then just weigh it in for pittance Sorry for crap pictures, really need a new phone. Already had the rear subframe and fuel tank off. cleaned everywhere, waxolyd all cavities. Started to fit rubstrips and other GTi associated parts. Im fitting a larger turbo (same turbo as daz/dylans GT2560r) not so much to make a lot more power but to make it more efficient, as my gt20 turbo is running flat out at 13 psi and will be producing a lot of heat. But I wont be fitting this to my freshly built 1.8t, instead im fitting it to a 100k old 1.8 turbo engine as a trial run to see how it all copes. I have given the engine a feshen up. New belts, pump, all serviceable gaskets, lick of paint and a general good check over and all looks well. New belt, tensioner and water pump Removed sump to remove any old sludge, it was quite dirty. | ||
Morey |
| ||
Events Organiser MP Admin Posts: 1923 Location: Somerset | Always admire your work mate, very tidy. Look forward to more news! | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | Cheers, I would of had more photos but coming out so shit I didn't bother. Got a new phone coming so should have better details | ||
Tobys |
| ||
Regular Posts: 179 Location: Sittingbourne, Kent | Well at least your old shell has gone to good use and we know it will be well looked after Can't wait to read this project, I do enjoy reading them and taking note for I get a project tro underway! Cannot wait to see the outcome Sean! ?? Edited by Tobys 23/2/2015 10:57 PM | ||
b155ett |
| ||
Elite Veteran Posts: 624 Location: Sleepy Ol' Suffolk | R100_vvc - 17/2/2015 6:22 AM b155ett - 16/2/2015 9:28 PM im half way through my build and have just noticed that I have the same charge cooler as yourself. how and where did you mount it? im thinking of using the smaller cinq rad for the cooling system???? I have it on a little bracket underneath, basically like a single leg which sat on top of the gearbox. I used cinq rad for the charge cooler rad, not sure it would be up to the job of cooling a 1.8t engine if that's what u ment? yeah for the charge cooler, ive the mgf rad for the 1.8 lump | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | abit more done, fitted gti shock mounts, modified the lower valance for mgf rad, painted it all up. Wings removed to check for inner wing rust. None found which is nice, waxolyed the cavities in the front. Fitted my new Nissan s15 turbo, modified the oil pipes to suit | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | Got the subframe fitted to the car tonight, fitted my new Avo shocks and came across a problem where the shocks bottom out before the bump stop so I made a nice sturdy bracket to lower the bottom mount by 30mm problem solved | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | I got the engine mounted today, type b diff fitted to a c6 pg1 gearbox and also fitted to the car (not pictured) Very happy with the new turbo as it gives an extra 1.5" of space between radiator and turbo compared to the gt20 which was always a close fit | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | Well its all done and running very well. Currently running actuator pressure plus a little around 9 psi. Feels very strong pull, just need to go to rolling road and gently up the boost until im happy. | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | not sure why the other pics came up small Edited by R100_vvc 6/4/2015 10:19 PM | ||
dazz 111 |
| ||
Extreme Veteran Posts: 592 Location: kent | Shame it's going to loose in a drag race against a kitten though best bring that Ā£20 with you | ||
djwilma |
| ||
Expert Posts: 2812 Location: Bournemouth | dazz 111 - 7/4/2015 4:05 AM Shame it's going to loose in a drag race against a kitten though best bring that Ā£20 with you You'll need that to pay me | ||
djwilma |
| ||
Expert Posts: 2812 Location: Bournemouth | dazz 111 - 7/4/2015 4:05 AM Shame it's going to loose in a drag race against a kitten though best bring that Ā£20 with you You'll need that to pay me | ||
djwilma |
| ||
Expert Posts: 2812 Location: Bournemouth | dazz 111 - 7/4/2015 4:05 AM Shame it's going to loose in a drag race against a kitten though best bring that Ā£20 with you You'll need that to pay me | ||
djwilma |
| ||
Expert Posts: 2812 Location: Bournemouth | dazz 111 - 7/4/2015 4:05 AM Shame it's going to loose in a drag race against a kitten though best bring that Ā£20 with you You'll need that to pay me | ||
dazz 111 |
| ||
Extreme Veteran Posts: 592 Location: kent | djwilma - 7/4/2015 8:39 PM dazz 111 - 7/4/2015 4:05 AM Shame it's going to loose in a drag race against a kitten though best bring that Ā£20 with you You'll need that to pay me What's this bet for? Least amount of parts falling off/breakdowns wins? (The bets in your favor atm) | ||
djwilma |
| ||
Expert Posts: 2812 Location: Bournemouth | I had some carbon fibre fall off So you may be winning | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | I took the metro for a health check on the rolling road to get accurate fuelling checked. Still on the standard zandf map, all seems good and good old mems has adjusted well to the new turbo. My ecu is mapped to control boost @ 13 psi. I left the solenoid off and fitted a manual boost controller whilst checks were being done. We adjusted boost up to 11 psi for which it made 215 bhp and a good steady hold of torque at 182 lbft. I have now refitted the solenoid and running full 13 psi again, so my torque should be better next time if I go back | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | Well 2 weeks in, running bigger gt2560 turbo on an high mileage turbo k series. Zero issues Loving every minute of the drive to pol and back, clocking up around 400 miles on that day with lots of abuse when I can safely of course. Cant wait to get it up santapod | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | fitted a mid silencer today to try and get rid of some of the bass I get around 3-4k rpm. It made a nice difference but still get a little booming around 3k when I lift off the throttle As you can see my rear box is not exactly massive either but im happy with it now Also fitted a switch to my boost solenoid, so I can run real low actuator pressure around 7 psi ish or full fat 13 psi on solenoid, this is in hope to help me at santapod in first gear Edited by R100_vvc 21/4/2015 8:53 AM | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | little update, the car seem to feel little off. So I removed the inlet manifold and discovered the inlet gasket had kind of disintegrated on every port! never had a problem like this before so I put it down to using a cheap shit gasket. So rather then refit a standard manifold, I decided to fit a vvc inlet manifold with the 52mm throttle body. No port matching done, just bolted straight on. I only had a mems2 vvc inlet so just drilled and fitted the mems3 map sensor to the front of the plenium which seems to work fine. and fitted a nice little coin tray for my keys I also fitted a 12 psi actuator as the standard 6 psi actuator seem to struggle to stay shut causing boost to drop as I think it was getting blown open at high rpm, and the end result was very good. Seems to have less lag, a lot more response on and off boost https://www.youtube.com/watch?v=FEMMzxk1cNI&feature=youtu.be A video with a pull from 3rd gear Edited by R100_vvc 1/5/2015 10:43 PM | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | fitted an AEM boost gauge which matches my afr gauge quite nicely | ||
111Sli |
| ||
Transport Guru MP Moderator Posts: 4947 Location: Bromley, Kent | Wicked | ||
zimzimmer |
| ||
Member Posts: 25 | looks awesome!! | ||
calrio |
| ||
Expert Posts: 1304 Location: in the 100 at the seaaaaaside! | nice build! Edited by calrio 20/7/2015 8:15 AM | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | Cheers people, not really done anything to it lately, fitted some nankang ns2r's which are epic value for money | ||
t3gav |
| ||
Elite Veteran Posts: 664 Location: Herts | Looking great! How do the Nankangs compare to the 888's you had? | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | Yea really good in comparison, not thrown it around that much but there pretty epic are getting power down on the road | ||
Paul r |
| ||
Extreme Veteran Posts: 539 Location: Swindon, Wilts | And by standard z@f map is it the 190bhp or 210bhp map? Any reason you chose the gt25 over the gt28? Also fusion fabrication maybe doing a tubular turbo manifold for the k-series soon for the gt range turbos | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | Don't think the fusion manifold will fit, gt25 is a nice size, comes on full boost at 3k rpm. Don't need a massive turbo on standard internals. I just wanted a more efficient turbo. I think its his later map, I running manual boost control now as found the ecu controlled boost control allows boost to drop of at high rpm. Now it holds 12 psi ish all the way to the top Edited by R100_vvc 28/7/2015 5:15 PM | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | Really rubbish picture of a dusty metro, but shes back on Comps And heres a really shiny picture before the comps | ||
beany113 |
| ||
Veteran Posts: 459 Location: sittingbourne, kent | Looks spot on mate, when I come up beginning of the week after I thought how nice it was! | ||
Saxokid100 |
| ||
dot dot dot Rally Spec Location: Northwest | Looks very nice on those comps | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | Decided to make a metro gti style tail pipe The original boring tail pipe started with a 45 degree bent stainless 2.5" pipe Cut with a grinder and polished up | ||
111Sli |
| ||
Transport Guru MP Moderator Posts: 4947 Location: Bromley, Kent | Love it mate. Has it changed the note at all? | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | I took it for a spin yesterday, first time I have driven It in a few months, it does seem to have less bass which is Good Fitted an aerial for the radio tonight and metro gti steering wheel. Starting to feel less poverty spec now | ||
Saxokid100 |
| ||
dot dot dot Rally Spec Location: Northwest | Looks nice finish. | ||
danny2009 |
| ||
Veteran Posts: 425 Location: South Yorkshire | It's the small details that count Looks oem now | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | Had a good go up santapod drag strip, was a good turn out with alot of other metros turning up Managed to crack in to the 12'S Can now do comfy 12.7 seconds @ 113 mph on road tyres and full trim. i did do a few runs with no rear seats or front passenger seat, but times didnt change Edited by R100_vvc 23/10/2016 7:04 PM | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | right off the line action shot | ||
DotMatrix |
| ||
Expert Posts: 4458 Location: Jelling, Denmark | nice action shot. the car looks good. did you win that race? | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | DotMatrix - 25/10/2016 9:47 PM nice action shot. the car looks good. did you win that race? yes won that one | ||
DotMatrix |
| ||
Expert Posts: 4458 Location: Jelling, Denmark | R100_vvc - 26/10/2016 6:04 PM DotMatrix - 25/10/2016 9:47 PM nice action shot. the car looks good. did you win that race? yes won that one Cool. The other car looks exciting and fast. What was it? | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | i think its an old vauxhall not to sure, was a v8 and made lots of noise, it wasn't far behind me im guessing it had 300 ish hp and more weight then me of course | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | I was going to Go emerald ECU, But decided i would give Mark from Kmaps a try to see what he can do with the stock mems3 ecu (formally ZandF tuning) i was very happy with the results and saved myself alot of money instead of going stand alone ecu | ||
DotMatrix |
| ||
Expert Posts: 4458 Location: Jelling, Denmark | Congrats. Thats a lot of power in a metro. I like the torque graph why not give it a bit more rpm? | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | DotMatrix - 12/2/2017 10:25 PM Congrats. Thats a lot of power in a metro. I like the torque graph why not give it a bit more rpm? yea the torque line is really impressive, i know it was tempting to raise the limiter but not sure the standard internals would handle it Comparing it to the Gt20 turbo at 11-12 psi | ||
DotMatrix |
| ||
Expert Posts: 4458 Location: Jelling, Denmark | It looks like this new setup has moved everything up the range by 1000rpm. I have no idea what rpm a standard bottom end can take but it would be fun to see the new graph for 500rpm more. by the looks of the graph the peak of the power curve would be somewhere in the 7000-7500rpm range. Edited by DotMatrix 13/2/2017 11:49 AM | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | DotMatrix - 13/2/2017 11:47 AM It looks like this new setup has moved everything up the range by 1000rpm. I have no idea what rpm a standard bottom end can take but it would be fun to see the new graph for 500rpm more. by the looks of the graph the peak of the power curve would be somewhere in the 7000-7500rpm range. Yea pretty much, my standard head may struggle to flow much more. There is a bloke running over 360 hp and limit 7500rpm on a standard k turbo bottom end with vvc solid cam head, You may have seen it in a very wild looking Lotus elise time attack car. All he has done to the bottom end is made the compression rings have more ring gap to prevent them pinching them up from the heat. | ||
DotMatrix |
| ||
Expert Posts: 4458 Location: Jelling, Denmark | Yes i have seen that car although he isnt on here much any more he posts on mg-rover.org where i have been reading a bit. Its a cool car but didn't he swap the rover engine for a toyota engine of some sort? Yes i did read about ring gap the other month but have never adjusted it on an engine. Not even the one i race. | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | nope its 100% k series, he is aiming for 450 hp this year, though this engine will be forged although i think crank will be standard! | ||
forcker |
| ||
Regular Posts: 241 Location: Germany | Could you give me a link to that build in the other forum? I am slowly collecting parts for a K series turbo and I am very inspired by this thread. Very clean and almost original looking car with that much power. Top work! | ||
R100_vvc |
| ||
Expert Posts: 2029 Location: sittingbourne, kent | forcker - 17/2/2017 4:37 PM Could you give me a link to that build in the other forum? I am slowly collecting parts for a K series turbo and I am very inspired by this thread. Very clean and almost original looking car with that much power. Top work! Thanks only place i know of his thread build is on facebook, which he has a page dedicated on it https://www.facebook.com/projectmantiselise/?pnref=story | ||
Tracktro |
| ||
Veteran Posts: 482 Location: Meuspath | R100_vvc - 17/2/2017 11:30 PM forcker - 17/2/2017 4:37 PM Could you give me a link to that build in the other forum? I am slowly collecting parts for a K series turbo and I am very inspired by this thread. Very clean and almost original looking car with that much power. Top work! Thanks only place i know of his thread build is on facebook, which he has a page dedicated on it https://www.facebook.com/projectmantiselise/?pnref=story Not that car | ||
DotMatrix |
| ||
Expert Posts: 4458 Location: Jelling, Denmark | Wow didn't know that one. I thought it was this one you talked about http://forums.mg-rover.org/mg-r-modification-tuning-7/dj-wilmas-elise-111s-s2-k-series-1-6-turbo-466694/#/topics/466694?page=22 | ||